What Muffler's Are You Running

[CRGRS 66]

I will be running a mild 260HP 350, and would like a little rumble, but don't want to wake the neighbours if I come home late...

I tried searching for previous threads, but searching "muffler" pretty much brought up every thread on the board...

So... if you want to weigh in with your opine, that would be great, or if you know of a thread that offers opinions on the subject, lemme know.

Thanks for listening

[Rich 5150 69]

Thrush, their small, compact tuck them up high under bed, some what quiet, won`t get on your nerves on a long ride but still noticeable.

[markeb01]

Here's an earlier thread you might find helpful:

http://67-72chevytrucks.com/vboard/s...exhaust+system

[Bradydz]

I use Cherry Bomb Turbo II's, 2-1/2" pipe. A tad noisy, but no where near as loud as others.

[DLOE65]

Porter mufflers (usa built).
Posted via Mobile Device

[athan66]

I went with Dynomax Super Turbos on my truck. Nice throaty sound at idle that only gets mildly louder as you get on the gas. I went with side exits behind the rear wheels.

[CRGRS 66]

Originally Posted by Rich 5150 69

Thrush, their small, compact tuck them up high under bed, some what quiet, won`t get on your nerves on a long ride but still noticeable.

Originally Posted by markeb01

Here's an earlier thread you might find helpful:

http://67-72chevytrucks.com/vboard/s...exhaust+system

Originally Posted by Bradydz

I use Cherry Bomb Turbo II's, 2-1/2" pipe. A tad noisy, but no where near as loud as others.

Originally Posted by DLOE65

Porter mufflers (usa built).
Posted via Mobile Device

Originally Posted by athan66

I went with Dynomax Super Turbos on my truck. Nice throaty sound at idle that only gets mildly louder as you get on the gas. I went with side exits behind the rear wheels.

Thanks to all for posting!

[63burban]

I used Smithys on mine, after a few thousand miles they open up to a nice nostalgic bark but no rapping, nice and mellow.

[vgnope]

Im running a 283,I put long tube hedders with a 2.5inch collector, ran to Flowmaster 40series 2.5inch offset in to center out.. Distance from collector to muffler 18inches, and a 45` elbow out.. Neighbors hear me start up few houses away..
Posted via Mobile Device

[MOTOIMPAIRED]

Just put 3" Thrush welded mufflers on my truck. Sound pretty darn good for the price.

[willyp]

I just bought these flowmaster 40 series delta flow. i dont have the same set up as you are running and i have not installed them yet. ill let you know how i like them.

1955 Chevy Bel Air with Flowmaster 40 Series...

[65Gregg]

I have Flow 40 series that dump behind the rear wheels, sounds good, no annoying drone either.

[McCoyAZ]

I am told by the guys at Flowmaster that the 50's with an H pipe sound throaty but not annoying.

[forestb]

I have a pair of cheep flowprows with turn downs and the neighbors can feel me start up down the street. I think I will be switching to somthing less loud that comes out in front of the rear tire.

[ol_skool_chevy]

Summit Racing street and strips,,,,,,,,,,they are flowmaster 40 clones Im told. but for 29.99 each Im not complaining
https://www.youtube.com/watch?v=iIeX...ure=plpp_video

[65panelrat]

These Polished Stainless Steel Hooker Mufflers on my 66' have a nice deep tone and bolt rite up to the header collector.

[jimmydean]

Originally Posted by ol_skool_chevy

Summit Racing street and strips,,,,,,,,,,they are flowmaster 40 clones Im told. but for 29.99 each Im not complaining
https://www.youtube.com/watch?v=iIeX...ure=plpp_video

These were usedon a budies4x4 and worked awesome. The price is killer, too.