|
09-18-2011, 07:09 PM
|
#1 |
|
Registered User
Join Date: Jan 2006
Location: Cherry Valley,Ca
Posts: 468
|
CPP big brake kit
Finished my installation of CPP big brake kit today so I figured Id post some pics and give my quick review.
I see this as a cheaper way to get into a big brake kit. Uses factory calipers from a late model chevy truck up front and 90s lincoln continental calipers in the rear with C5 style rotors(13" in front and 12" in rear). It also uses their modular spindle that narrows track width(as compared to 73-87 disc brakes) which allows for more wheel to fender clearance or a deeper rim. Installation is very straight forward. I only needed hand tools and everything fit together nicely. Instructions for the rear kit were a bit universal but easy to understand with only a little bit of guess work required. Both kits came with all the hardware needed including hoses, hard line kit for the rear, parking brake cables and misc. clips. Havent driven it yet(olds wheels wont fit over new brakes) but cant foresee any problems so for the price I satisfied. Hers the pics. |
|
|
|
09-22-2011, 10:40 AM
|
#2 |
|
Registered User
 
Join Date: Oct 2004
Location: Milwaukee, WI
Posts: 403
|
Re: CPP big brake kit
Very cool
|
|
|
|
|
09-22-2011, 12:36 PM
|
#3 |
|
Registered User
Join Date: Apr 2006
Location: Miami now in Vegas
Posts: 828
|
Re: CPP big brake kit
Would you mind posting up a price breakdown on what you had to buy to complete the kit?
Posted via Mobile Device
__________________
Long live SLIM ------------------ At least try to buy American 
|
|
|
|
|
09-23-2011, 04:42 AM
|
#4 |
|
Registered User
Join Date: Jan 2006
Location: Cherry Valley,Ca
Posts: 468
|
Re: CPP big brake kit
Just had to buy 2 things, front kit was $1100(includes spindles) and rear kit was $700. Both kits were complete and other than having to buy new brakes hoses for the front and some brake line adapter for the rear(Im running AN lines, so most people wouldn't need these)the kits were very complete. I didn't opt for the powder coated calipers so I ended up painting mine w/ caliper paint, I wasn't sure that powder coat would hold up under then temps that brake calipers see.
|
|
|
|
|
09-25-2011, 10:49 AM
|
#5 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: CPP big brake kit
Nice job on the brakes. Would you post some pictures of the exshaust you have done.
 
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
09-26-2011, 08:03 PM
|
#6 |
|
Registered User
Join Date: Jan 2006
Location: Cherry Valley,Ca
Posts: 468
|
Re: CPP big brake kit
Hers a couple exhaust pics
|
|
|
|
|
10-09-2011, 03:28 AM
|
#7 |
|
Registered User
Join Date: Jan 2011
Location: Lawrenceville, GA
Posts: 1,080
|
Re: CPP big brake kit
intresting way to run the exhaust... are the mufflers going to be hidden under the body? Will you be able to see them when standing on the side of the truck?
__________________
Never wrenched a day in my life and now... Im doing a frame off restoration on a 1968 C10 with a Porterbuilt Dropmember, Acuair E-Level kit, Boyd Welds Gas tank and mild c-notch. Click here to view my build |
|
|
|
|
10-30-2012, 08:53 PM
|
#8 |
|
Project '67 454
Join Date: Jan 2009
Location: Columbia SC
Posts: 283
|
Re: CPP big brake kit
Oldspowered67C10,
I would like to order this kit too but I am concerned whether or not my Boss 338 wheels will fit this front hub as they fit very tight on the stock rotor. Would you mind taking some measurements for me? I would like to know the diameter of the hub at the base where the rotor sits, the diameter of the hub at the end where the dust cap goes on, the length of the hub from rotor(installed) to the end where the dust cap goes on, and lastly the length of the lug nut studs with rotor installed. Thanks in advance for your help,
__________________
67 C-10 SWB Fleetside 454 (current project) 99 Crewcab SWB Dually 454 75 Datsun 280ZZ430 94 Formula 232LS 454
|
|
|
|
|
10-31-2012, 12:51 PM
|
#9 |
|
Registered User
Join Date: May 2005
Location: Beaverton, OR
Posts: 3,728
|
Re: CPP big brake kit
I like the look of the CPP kit, but can't justify the price when you can go Corvette for cheaper (and lighter).
http://67-72chevytrucks.com/vboard/s...d.php?t=465140
__________________
New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210 |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
