CA '68 C10 long fleet ready to part. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jerry Jones · 11-02-2012, 12:05 PM

Bump up.

camrycurt · 11-02-2012, 01:15 PM

Do you still have the floor shift column and the steering wheel?

If yes, could you post up a pic of the wheel? What is the condition like under that wrap? Any cracks, etc.? Do you have the horn button?

What is your shipped price on the column and wheel to 20176?

Thanks!

Jerry Jones · 11-02-2012, 07:35 PM

Quote:

Originally Posted by camrycurt

Do you still have the floor shift column and the steering wheel?

If yes, could you post up a pic of the wheel? What is the condition like under that wrap? Any cracks, etc.? Do you have the horn button?

What is your shipped price on the column and wheel to 20176?

Thanks!

Here is what it looks like, there are cracks at the hub and chips at the back of the hub. The wheel itself looks really good under the wrap. I will take $100 for both plus shipping, and if you are interested I will pull them tomorrow and figure shipping.

Jerry Jones · 11-04-2012, 06:35 PM

Quote:

Originally Posted by Jerry Jones

Here is what it looks like, there are cracks at the hub and chips at the back of the hub. The wheel itself looks really good under the wrap. I will take $100 for both plus shipping, and if you are interested I will pull them tomorrow and figure shipping.

If I ship wheel and column separately, I can ship for around $50.

camrycurt · 11-06-2012, 12:24 PM

Quote:

Originally Posted by Jerry Jones

If I ship wheel and column separately, I can ship for around $50.

Hey, thanks for the shipping quote and pics but I will pass on the wheel and column.

Thanks.

11-02-2012, 12:05 PM	#1
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,407	Re: '68 C10 long fleet ready to part. Bump up. __________________ RIP El Jay! Love you brother!

11-02-2012, 01:15 PM	#2
camrycurt Registered User Join Date: Jul 2010 Location: Leesburg, VA Posts: 420	Re: '68 C10 long fleet ready to part. Do you still have the floor shift column and the steering wheel? If yes, could you post up a pic of the wheel? What is the condition like under that wrap? Any cracks, etc.? Do you have the horn button? What is your shipped price on the column and wheel to 20176? Thanks! __________________ Curt 1970 C/10, 250 L6 with Rochester BV carb, SM465 4 speed, 3.73 open rear

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.