Checking this 69 out tomorrow.. - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gringoloco · 11-23-2012, 10:26 PM

If the 66 is solid and running, it could be worth it, and easier to cut down than a 67-72. Seriously on that heater delete. Grab it if you can--very rare piece
Posted via Mobile Device

**lolife99** · 11-23-2012, 10:30 PM

Never even noticed the heater delete!

dukcaln · 11-23-2012, 10:42 PM

PASS on all of them, keep searching they are out there... that blue one will cost u 4k just to fix the rust... theothers aren't all that either. keep searching

Elchopperfreak · 11-23-2012, 10:51 PM

The 66 is all there, but the wheels and a cracked manifold, but its quite a large truck.

The 68 fleetside, all I would need is a few patches and time, ( got to check my donor truck for whas there) if needed I can paint it very cheap.
I threw 5 grand as a number, since I would do all the work myself.
Posted via Mobile Device

Rochlow · 11-23-2012, 11:51 PM

The heater delete on that 68 is super rare.. Like said before, best part on this truck.
Posted via Mobile Device

PAWS 72 · 11-24-2012, 01:05 AM

Quote:

Originally Posted by Elchopperfreak

He also has this, in excellent condition, no rust, running..1968 Fargo ( I know, not chevy..)

Posted via Mobile Device

But I would take it.

Elchopperfreak · 11-24-2012, 01:16 PM

Paws...me too..
But a bit too much $$
Posted via Mobile Device

Elchopperfreak · 11-24-2012, 01:17 PM

Looking at a 72 today, good price, maybe a quick flip..
Will see

Elchopperfreak · 11-24-2012, 01:27 PM

Posted via Mobile Device

**67cheby** · 11-24-2012, 01:31 PM

i like that GMC !

Elchopperfreak · 11-24-2012, 01:53 PM

Quote:

Originally Posted by 67cheby

i like that GMC !

And I dig your truck!!!!
Another shot of the GMC, quite a big truck..

Posted via Mobile Device

Elchopperfreak · 11-24-2012, 08:23 PM

well..
got the 72 today, needs some body work, but, we are in an island..
patina special..the spid is painted over..
runs really good.
and the price was good..
Posted via Mobile Device

Elchopperfreak · 11-24-2012, 08:24 PM

pics tomorrow with daylight..
need decent wheels asap..
Posted via Mobile Device

gringoloco · 11-24-2012, 11:48 PM

Good choice! Best of what you've shown here
Posted via Mobile Device

Elchopperfreak · 11-25-2012, 12:01 AM

Im still searching for a fleetside.
My dad liked the 72, quite much, so he got an early Christmas gift. ( so no flip for me..) it was only $1400.00
Needs body work, more so in the roof..We will work on it during the holidays and maybe if someone really likes it, ill try my best to persuade my dad to let it go..
Posted via Mobile Device

Elchopperfreak · 11-25-2012, 09:43 PM

Worked a bit on the 72, topped fluids, checked it all around, sanded some of the rust oleum off, found a set of wheels 15"x6"

Noticed that the steering box moves left to right, and the brackets seem to be off..
Will start a new thread with the step by step on the 72.
Posted via Mobile Device

11-23-2012, 10:26 PM	#26
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Checking this 69 out tomorrow.. If the 66 is solid and running, it could be worth it, and easier to cut down than a 67-72. Seriously on that heater delete. Grab it if you can--very rare piece Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

11-23-2012, 10:30 PM	#27
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,717	Re: Checking this 69 out tomorrow.. Never even noticed the heater delete! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

11-23-2012, 10:42 PM	#28
dukcaln Registered User Join Date: Jul 2011 Location: vacaville ca Posts: 1,304	Re: Checking this 69 out tomorrow.. PASS on all of them, keep searching they are out there... that blue one will cost u 4k just to fix the rust... theothers aren't all that either. keep searching __________________ 04 CHEVY LLY LS DURAMAX 4WD. MODS TO FOLLOW, EFI LIVE, BUILT TRANS, LBZ MP, LIFT PUMP *SOLD* 1972 chevy c10

11-23-2012, 10:51 PM	#29
Elchopperfreak Registered User Join Date: Aug 2012 Location: San Juan, Puerto Rico Posts: 164	Re: Checking this 69 out tomorrow.. The 66 is all there, but the wheels and a cracked manifold, but its quite a large truck. The 68 fleetside, all I would need is a few patches and time, ( got to check my donor truck for whas there) if needed I can paint it very cheap. I threw 5 grand as a number, since I would do all the work myself. Posted via Mobile Device

11-23-2012, 11:51 PM	#30
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Checking this 69 out tomorrow.. The heater delete on that 68 is super rare.. Like said before, best part on this truck. Posted via Mobile Device

11-24-2012, 01:16 PM	#32
Elchopperfreak Registered User Join Date: Aug 2012 Location: San Juan, Puerto Rico Posts: 164	Re: Checking this 69 out tomorrow.. Paws...me too.. But a bit too much $$ Posted via Mobile Device

11-24-2012, 01:17 PM	#33
Elchopperfreak Registered User Join Date: Aug 2012 Location: San Juan, Puerto Rico Posts: 164	Re: Checking this 69 out tomorrow.. Looking at a 72 today, good price, maybe a quick flip.. Will see Last edited by Elchopperfreak; 11-24-2012 at 01:24 PM.

11-24-2012, 01:27 PM	#34
Elchopperfreak Registered User Join Date: Aug 2012 Location: San Juan, Puerto Rico Posts: 164	Re: Checking this 69 out tomorrow.. Posted via Mobile Device

11-24-2012, 01:31 PM	#35
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Checking this 69 out tomorrow.. i like that GMC ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-24-2012, 08:23 PM	#37
Elchopperfreak Registered User Join Date: Aug 2012 Location: San Juan, Puerto Rico Posts: 164	Re: Checking this 69 out tomorrow.. well.. got the 72 today, needs some body work, but, we are in an island.. patina special..the spid is painted over.. runs really good. and the price was good.. Posted via Mobile Device

11-24-2012, 08:24 PM	#38
Elchopperfreak Registered User Join Date: Aug 2012 Location: San Juan, Puerto Rico Posts: 164	Re: Checking this 69 out tomorrow.. pics tomorrow with daylight.. need decent wheels asap.. Posted via Mobile Device

11-24-2012, 11:48 PM	#39
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Checking this 69 out tomorrow.. Good choice! Best of what you've shown here Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

11-25-2012, 12:01 AM	#40
Elchopperfreak Registered User Join Date: Aug 2012 Location: San Juan, Puerto Rico Posts: 164	Re: Checking this 69 out tomorrow.. Im still searching for a fleetside. My dad liked the 72, quite much, so he got an early Christmas gift. ( so no flip for me..) it was only $1400.00 Needs body work, more so in the roof..We will work on it during the holidays and maybe if someone really likes it, ill try my best to persuade my dad to let it go.. Posted via Mobile Device

11-25-2012, 09:43 PM	#41
Elchopperfreak Registered User Join Date: Aug 2012 Location: San Juan, Puerto Rico Posts: 164	Re: Checking this 69 out tomorrow.. Worked a bit on the 72, topped fluids, checked it all around, sanded some of the rust oleum off, found a set of wheels 15"x6" Noticed that the steering box moves left to right, and the brackets seem to be off.. Will start a new thread with the step by step on the 72. Posted via Mobile Device

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.