Looking for new wheels..Offset????

[mrfixit4818]

I have a 64 c10 stepside 6 lug and I just put in 4in. rear drop springs and on the front I am getting ready to put on 2 in. drop springs and 2.5 in drop spindles.was thinking on some new 17s wheels but not sure about the offset.was also wanting to put a little bit wider tire on the back.Any suggestions on tire sizes also?????Help!!!!!!!!!!!!

[lil_sahara450r]

not sure about the step side part, but I will tell ya what I have on my SWB. 275/55/r17 on the back and 255/50/r17 on the front. These are on 17x8 torq thrusts with 4 inch backspacing. My truck is bagged front and rear with a c notch in the back and bags with upper plates and cups in the front with drop spindles. No clearence issues here

[newbe351]

I run the same as III sahara on a fleetside except with 17x8 centerlines with 4 1/2" backspacing. When I put in the 4" drop springs on the rear (which turned out to be closer to 5" drop), I had to get 1" spacers to clear the fender well on the inside.

[mrfixit4818]

will these work,it says 4.5 back spaceing,0 offset http://www.ebay.com/itm/330836533246...84.m1423.l2649