some possible new wheels and tires - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JayDubBlazer · 10-23-2003, 11:46 AM

I thought I would try on some different tires now that I have Photoshop. I am getting better at it but still it looks corny.
These are the 18" MB Motoring smooth

JayDubBlazer · 10-23-2003, 11:47 AM

These are the Kaiser Phoenix IV 18"

JayDubBlazer · 10-23-2003, 11:49 AM

These are 17" American Racing Diamond Back #617

JayDubBlazer · 10-23-2003, 11:53 AM

These are MB Motoring Shock 18" which are very simular to the Mickey Thompson Classic

JayDubBlazer · 10-24-2003, 01:21 AM

come guys I know it isn't the best photoshop job ever but I would like some feed back.

dinnut · 10-25-2003, 12:23 AM

number 3 and 4 look kinda stockish to me.

70 Jimmy · 10-25-2003, 12:57 PM

#1 with bigger meats though. Looks like a jacked up 2wd like that.

2wdBlazer · 10-25-2003, 04:40 PM

#4. I personally don't like more than a 16' on a 4x4.

Tims72blazer · 10-25-2003, 08:16 PM

I feel the same way. I know having the 17-20' rims is the in thing right now. I still think less rim and more tire looks better on a 4x4. At the most a 16' rim. Other wise it looks to much like a jacked up street trcuk. Just my 2 cents.

Tim

TRUK · 10-26-2003, 12:17 AM

On a 4X4 I agree that more meat is better than more wheel. I like the stock GM Rally Wheel in the silver/grey powder coat... or a black wheel looks tough.

JayDubBlazer · 10-26-2003, 07:02 AM

I not going for the "street" look or anything. It is just that I do drive it alot during the summer and don't want several inces of rubber for my truck to bonce on. I was thinking if I got 17" or 18" rims with a 285R60 (6.5" sidewall) I could take some of that play out. I do realize that it is a older four wheel drive with straight axels and a short wheel base. A 15 wheel would have about 8" of tire. Just trying to take some of the bounce out.

3wbdriver · 10-26-2003, 11:13 AM

I may be talking out the wrong side of my mouth (actual experience being zero), but it seems to me if you go with a shorter sidewall, you will be INCREASING the harsh ride characteristic.
I am a roundy-round dirt track racer by hobby, and we all still run 15" wheels on our stock cars. I believe the main reason for this is because it allows the side wall to flex, allowing the tread to maintain it's contact patch with the racing surface longer.
Road/Sports car racers are running 17-20" rims because they want minimum flex, allowing them to tune their suspensions without giving up too much spring rate to the tire. They actually want the harsh ride, to maintain maximum adhesion on a smooth surface.
Pro Offroad racers do run 17-18" wheels, but they are doing it with 36-38" tires, and I think they are just trying to keep the amount of side wall to a reasonable level. And they run soft spring/shock setups, with lotsa travel.
Short of custom tuning your spring/shock package, I don't believe you're going to get that wonderful - I actually love the feedback - bounce out of the ride. Especially with a SWB, live axle/leaf spring setup. That's the main thing that began the death of the CJ-5 in the 70's-80's. It just wasn't "comfy" on the road to the current generation of drivers.
But, like I said earlier, I may just be blowing smoke. I am just an old fart, who's nostalgic for the older, simpler rides of the pre-gas crunch era. Hope this helps.

10-23-2003, 11:47 AM	#2
JayDubBlazer go cyclones Join Date: Jun 2003 Location: Ames, IA Posts: 1,883	option #2 These are the Kaiser Phoenix IV 18" Attached Images __________________ Wes PROJECT OLE GREEN 1972 Blazer 4X4 350/700R4 2017 Silverado LT Last edited by JayDubBlazer; 10-23-2003 at 11:50 AM.

10-23-2003, 11:49 AM	#3
JayDubBlazer go cyclones Join Date: Jun 2003 Location: Ames, IA Posts: 1,883	These are 17" American Racing Diamond Back #617 Attached Images __________________ Wes PROJECT OLE GREEN 1972 Blazer 4X4 350/700R4 2017 Silverado LT

10-24-2003, 01:21 AM	#5
JayDubBlazer go cyclones Join Date: Jun 2003 Location: Ames, IA Posts: 1,883	come guys I know it isn't the best photoshop job ever but I would like some feed back. __________________ Wes PROJECT OLE GREEN 1972 Blazer 4X4 350/700R4 2017 Silverado LT

10-25-2003, 12:57 PM	#7
70 Jimmy aka Crusher, Crushergmc Join Date: Mar 2000 Location: Oregon Posts: 1,834	#1 with bigger meats though. Looks like a jacked up 2wd like that. __________________ "KEEP IT DOWN!" 70 Jimmy 454 2wd 56 GMC Big Window "It's funny till someone gets hurt, then it's freakin' hilarious"

10-25-2003, 04:40 PM	#8
2wdBlazer The Blazer King Join Date: Sep 2000 Location: Valrico, Fl (Tampa) Posts: 1,212	#4. I personally don't like more than a 16' on a 4x4. __________________ 72 2wd Blazer. Its the superbichinest, megacoolinest, superflowinest.

10-23-2003, 11:46 AM	#1
JayDubBlazer go cyclones Join Date: Jun 2003 Location: Ames, IA Posts: 1,883	some possible new wheels and tires I thought I would try on some different tires now that I have Photoshop. I am getting better at it but still it looks corny. These are the 18" MB Motoring smooth Attached Images __________________ Wes PROJECT OLE GREEN 1972 Blazer 4X4 350/700R4 2017 Silverado LT

10-23-2003, 11:53 AM	#4
JayDubBlazer go cyclones Join Date: Jun 2003 Location: Ames, IA Posts: 1,883	These are MB Motoring Shock 18" which are very simular to the Mickey Thompson Classic Attached Images __________________ Wes PROJECT OLE GREEN 1972 Blazer 4X4 350/700R4 2017 Silverado LT

10-25-2003, 12:23 AM	#6
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	number 3 and 4 look kinda stockish to me. __________________ 70 longbed 496/th400/Ford 9"

10-25-2003, 08:16 PM	#9
Tims72blazer Registered User Join Date: Jun 2003 Location: San Diego Posts: 14	I feel the same way. I know having the 17-20' rims is the in thing right now. I still think less rim and more tire looks better on a 4x4. At the most a 16' rim. Other wise it looks to much like a jacked up street trcuk. Just my 2 cents. Tim

10-26-2003, 12:17 AM	#10
TRUK Registered User Join Date: Oct 2003 Location: Carlsbad, CA Posts: 38	On a 4X4 I agree that more meat is better than more wheel. I like the stock GM Rally Wheel in the silver/grey powder coat... or a black wheel looks tough. __________________ TRUK ~~~~~~~~~~~~~~~~ 2BLUE72 K5 BLAZER 4X4 ~~~~~~~~~~~~~~~~

10-26-2003, 07:02 AM	#11
JayDubBlazer go cyclones Join Date: Jun 2003 Location: Ames, IA Posts: 1,883	I not going for the "street" look or anything. It is just that I do drive it alot during the summer and don't want several inces of rubber for my truck to bonce on. I was thinking if I got 17" or 18" rims with a 285R60 (6.5" sidewall) I could take some of that play out. I do realize that it is a older four wheel drive with straight axels and a short wheel base. A 15 wheel would have about 8" of tire. Just trying to take some of the bounce out. __________________ Wes PROJECT OLE GREEN 1972 Blazer 4X4 350/700R4 2017 Silverado LT

10-26-2003, 11:13 AM	#12
3wbdriver Registered User Join Date: Aug 2003 Location: West Central Louisiana Posts: 82	I may be talking out the wrong side of my mouth (actual experience being zero), but it seems to me if you go with a shorter sidewall, you will be INCREASING the harsh ride characteristic. I am a roundy-round dirt track racer by hobby, and we all still run 15" wheels on our stock cars. I believe the main reason for this is because it allows the side wall to flex, allowing the tread to maintain it's contact patch with the racing surface longer. Road/Sports car racers are running 17-20" rims because they want minimum flex, allowing them to tune their suspensions without giving up too much spring rate to the tire. They actually want the harsh ride, to maintain maximum adhesion on a smooth surface. Pro Offroad racers do run 17-18" wheels, but they are doing it with 36-38" tires, and I think they are just trying to keep the amount of side wall to a reasonable level. And they run soft spring/shock setups, with lotsa travel. Short of custom tuning your spring/shock package, I don't believe you're going to get that wonderful - I actually love the feedback - bounce out of the ride. Especially with a SWB, live axle/leaf spring setup. That's the main thing that began the death of the CJ-5 in the 70's-80's. It just wasn't "comfy" on the road to the current generation of drivers. But, like I said earlier, I may just be blowing smoke. I am just an old fart, who's nostalgic for the older, simpler rides of the pre-gas crunch era. Hope this helps. __________________ '72 Blazer, 4WD, 350/4 spd. Affectionately known as "Da Beast" '04 Silverado (new daily driver) '00 Intrepid (wife's ride) It's a BLAZER dude! No options, no emblems, no a/c, no fancy shmancy. It's a BLAZER....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.