Wheel Backspacing/Size Questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PrimeredThunder · 11-03-2003, 02:07 PM

Ok, now that I've got my truck bagged, I'm looking for some new rollers. I'm trying to decide beween 17, 18 or 20's and dont know what I need for backspacing. There is no drop spindles or c-notch out back. Also, what size tires should I run? I dont want rubber bands, but also not too much sidewall. Any help would be greatly appreciated. By the way, the truck is a 72' with 5x5 bolt pattern and front discs/stock 12 bolt rearend.

Thanks,

Kenny

fastbagged68 · 11-03-2003, 04:51 PM

I beleive the offset on a 8inch rim will be 4.5" inches. You could run 245-40-20. they still ahve a good amount of side wall. or 255-50-17, or 255-45-18. All bout the same size in overall height.

PrimeredThunder · 11-03-2003, 08:57 PM

Would that offset be for both the front and rear? I would probably be getting some 18's or 20's for sure. Any suggestions on what brand tires to look at?

Kenny

Slammed67 · 11-04-2003, 02:08 PM

Personally, I don't like the looks of 18s-20s on these trucks. The 20's make the 18's look too small and the 18's make the 20's look to big (if that make sense). Just my $0.02. "It's all about the look you want."

So I went with 18's all around. I think 18s-19s would be the perfect combination, but of course 19s aren't available in may styles/sizes.

I have 18x8's with 4.5" b.s. up front and 18x9.5's with 5.25" b.s. in the rear. Front tires are 255/45/18 and the rears are 285/40/18. I wanted the front and rear sidewalls to be the same height and those sizes were as close as I could get. With those wheel tire combinations, the 4.5" and 5.25" b.s. measurements are the least I'd go. I could have gone with a 5.5" b.s in the rear, but wanted them as far out as possible while still tucking when the bags were dumped. Like I tell everyone who asks about my wheels/tires..... MAKE YOUR OWN MEASUREMENTS BEFORE YOU BUY.... DON'T JUST RELY ON WHAT I USED!

As for tires, I found the Dunlop SP Sport 9000's to be the best deal and they have a cool tread pattern

phantom dually · 11-04-2003, 07:26 PM

I just bougt some 245 40 20's from tire rack at $235. They are BFG.

11-03-2003, 02:07 PM	#1
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	Wheel Backspacing/Size Questions Ok, now that I've got my truck bagged, I'm looking for some new rollers. I'm trying to decide beween 17, 18 or 20's and dont know what I need for backspacing. There is no drop spindles or c-notch out back. Also, what size tires should I run? I dont want rubber bands, but also not too much sidewall. Any help would be greatly appreciated. By the way, the truck is a 72' with 5x5 bolt pattern and front discs/stock 12 bolt rearend. Thanks, Kenny __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

11-03-2003, 08:57 PM	#3
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	Would that offset be for both the front and rear? I would probably be getting some 18's or 20's for sure. Any suggestions on what brand tires to look at? Kenny __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

11-04-2003, 02:08 PM	#4
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	Personally, I don't like the looks of 18s-20s on these trucks. The 20's make the 18's look too small and the 18's make the 20's look to big (if that make sense). Just my $0.02. "It's all about the look you want." So I went with 18's all around. I think 18s-19s would be the perfect combination, but of course 19s aren't available in may styles/sizes. I have 18x8's with 4.5" b.s. up front and 18x9.5's with 5.25" b.s. in the rear. Front tires are 255/45/18 and the rears are 285/40/18. I wanted the front and rear sidewalls to be the same height and those sizes were as close as I could get. With those wheel tire combinations, the 4.5" and 5.25" b.s. measurements are the least I'd go. I could have gone with a 5.5" b.s in the rear, but wanted them as far out as possible while still tucking when the bags were dumped. Like I tell everyone who asks about my wheels/tires..... MAKE YOUR OWN MEASUREMENTS BEFORE YOU BUY.... DON'T JUST RELY ON WHAT I USED! As for tires, I found the Dunlop SP Sport 9000's to be the best deal and they have a cool tread pattern __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra

11-04-2003, 07:26 PM	#5
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	I just bougt some 245 40 20's from tire rack at $235. They are BFG. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-03-2003, 04:51 PM	#2
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	I beleive the offset on a 8inch rim will be 4.5" inches. You could run 245-40-20. they still ahve a good amount of side wall. or 255-50-17, or 255-45-18. All bout the same size in overall height.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.