|
02-08-2013, 01:55 PM
|
#1 |
|
Registered User
Join Date: May 2011
Location: Iraq
Posts: 69
|
turn signal help
Ok, I have a '76 K10. I just rewired the tail lights. running lights, hazards, and brake lights all work, but when i turn on the blinker, I get nothing. Any ideas. Thanks
__________________
Marshall 1976 Chevrolet K10 4wd 2006 Chevrolet Impala (wife) IF IT JAMS FORCE IT!! IF IT BREAKS, IT NEEDED TO BE REPLACED ANYWAY!! 
|
|
|
|
02-08-2013, 02:52 PM
|
#2 |
|
Registered User
Join Date: Nov 2010
Location: Windsor Locks
Posts: 628
|
Re: turn signal help
Ask the dump questions first... have you checked the flashers and fuses? I had tons of probs with with 76 signals and brake lights but it was pretty much all the rear harness being wasted.
|
|
|
|
|
02-14-2013, 09:24 PM
|
#3 |
|
Registered User
Join Date: May 2011
Location: Iraq
Posts: 69
|
Re: turn signal help
i just rewired the the back lights from the fuse block back. but my turn signal switch on the steering column is really loose and I have to push really hard to make it click, and the auto turn off stop awhile ago.
__________________
Marshall 1976 Chevrolet K10 4wd 2006 Chevrolet Impala (wife) IF IT JAMS FORCE IT!! IF IT BREAKS, IT NEEDED TO BE REPLACED ANYWAY!!
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
