MA K10 front axle Dana 44

[63burban4x4]

I have a complete '63 closed knuckle Dana 44 front axle, including the original Spicer locking hubs. 3:93 ratio. asking $100, prefer to sell local, due to the weight.

located on the CT/MA border, just west of the "notch"

[rossboss]

Would be interested in selling the hubs only.

[63burban4x4]

Originally Posted by rossboss

Would be interested in selling the hubs only.

sending PM to rossboss. anyone interested in this thing complete should speak up now.

[63burban4x4]

I just realized these are not "Spicer" hubs, but "Specialized Automotive Engineering". I had not looked at them since I removed the axle, quite a while ago. can't seem to post pics, I'll try to figure out why.

[63burban4x4]

still got it. will sell hubs only $30/ea + shipping

[bhc41051]

Hi Ed, I have a set of mismatched hubs on my basket case 62 K10. The Hub I need is the one on the right. it measures 7-1/4" tall and 6" from the bottom to the TOP of the ring that holds the lug nuts. let me know price for the pair with the lockouts; with shipping to 43025... thanks!

[63burban4x4]

I'd do $50 for the pair, plus the shipping. I'll try to get a price on the shipping today & PM you.

I'm not sure which hubs I have, but I'm pretty sure they match each other, at least. If you get both of mine, I'm sure one way or the other you'd have a matched set.....probably 3 of a kind! plus a matching set of lockouts. -Ed

[bhc41051]

Price sounds good Ed, try to get a measurement or photo of the hub for me.. I don't mind having three hubs, I just don't want three of the wrong hubs
Or if your hubs are like the one on the left, maybe your drums are 1/2 wider that would make up the gap between the drum and the backing plate..

[63burban4x4]

Brian, I understand. These hubs are definitely a matched set, and appear to be the same as your one pictured on the right. they measure 6" from the end, to the back of the stud pate. I also measured the spindles, they are 5-3/8" total from the backing plate, and the end of the axle is 6-7/8", again, measured from the backing plate out.

Upon dissasembling, I'd say these hubs are in great shape, nothing inside appears to be damaged in any way.

I hope to be able to get a shipping quote today. -Ed

[bhc41051]

Okay Ed, I'm sold just PM me with shipping and your address and I'll send you a money order.. Thank you for all your time and trouble

[63burban4x4]

O Brian
Got a couple of busy days here, but I'll be working on it.

special note to CVS: send my sponsorship check, thanks!

[bhc41051]

No worries Ed, give me a yell when you get caught up.. Thanks!

[63burban4x4]

Brian, sent you a PM -Ed

[63burban4x4]

OK Brian, Fed Ex ground 26.70. sent u a PM with the payment info. Ed

[63burban4x4]

rec'd payment from Brian, hubs will be be on their way Monday. I will wait a little bit on the rest of the axle, but she'll soon be on her way to becoming a KIA.....pound for pound, they must be able to get an entire Kia from the rest of that axle, no?

[63burban4x4]

shipped hubs 12/17/12

[JPBrecheisen]

Do you still have this front axle laying around?

I'd be interested in a few parts off of it if you do.

Thanks.

Jonathon