How much $$$ for air ride? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pat · 11-18-2003, 02:31 AM

Im thinking this may be out of my price range, but I may as well ask. How much does a basic air ride kit cost?

Izzy · 11-18-2003, 11:07 AM

$1500 at a bare minimum and that will be a 2 path system with probably 1 compressor and 1 tank.

rigo · 11-18-2003, 11:52 AM

my current system on my truck is a manual valved 2 way system with one 7 gallon tank, a york compressor (not installed yet) and firestone 224c at all corners... i built my own plates and cups..i have a little over $700 in it...check ebay for stuff..

on my 64 pontiac...most of that stuff is from air ride technologies...with ride pro valves, thomas compressors and such and i've got about $1200-1500 in that one.

pat · 11-18-2003, 01:40 PM

ouch..........
No air ride for me, mebbe when Im outta college and makin $$$.

SCOTI · 11-18-2003, 03:32 PM

Pat, were you wanting to do a 4 or 2 wheel system?

pat · 11-19-2003, 03:37 AM

Four, if I were to do it.

PrimeredThunder · 11-19-2003, 01:23 PM

I did mine for a little over $500...and this was on a 16Yr-old budget

I am running firestone bags, airride technologies brackets, 4 SMC 3/8 electric solenoids, 6 gallon tank, Viair 325C compressor. No notch or drop spindles yet. If you buy everything seperatly you can save yourself quite a bit of money. By the way, the 2-path systems work great as long as you have a sway bar on your truck, i've driven mine with no troubles for quite some time with a sway bar in front and a 2-path system.

Kenny

loweredd · 11-19-2003, 03:33 PM

I think I have a little under $800 in mine too. 2600 Firestones at all 4 corners, 1/2 fill valves, 3/8 SMC dumps, ViAir 450C comp. 5 gallon airride tank, 1/2 push-loc line, it is a 4 way system.

If you check out forums, and ebay, and get components individually, you can get it done for cheap. I got the 1/2 fill valves for $110 shipped cause a guy on S10forum got a set for his birthday and didnt need them. You can always find someone that needs to sell air components cause they need the scratch.

11-18-2003, 02:31 AM	#1
pat Senior Member Join Date: Jul 2002 Location: Lindsay, TX Posts: 1,245	How much $$$ for air ride? Im thinking this may be out of my price range, but I may as well ask. How much does a basic air ride kit cost? __________________ 68 Chevy 383/350 w/shift kit, 380hp/425ft-lbs, 4.5/5 drop, 17" TT2s 64 Cadillac Sedan DeVille

11-18-2003, 11:52 AM	#3
rigo Flake Daddy Join Date: Jan 2003 Location: Plainview TEXAS Posts: 456	my current system on my truck is a manual valved 2 way system with one 7 gallon tank, a york compressor (not installed yet) and firestone 224c at all corners... i built my own plates and cups..i have a little over $700 in it...check ebay for stuff.. on my 64 pontiac...most of that stuff is from air ride technologies...with ride pro valves, thomas compressors and such and i've got about $1200-1500 in that one. __________________ 1968 SWB Fleet Daily Driver 350/TH400 shaved driprail,emblems,tailgate,air ride suspension 1964 Pontiac Catalina 2dr. hardtop shaved everything, air ride suspension 1998 Range Rover 1960 El Camino....in the works.....

11-18-2003, 01:40 PM	#4
pat Senior Member Join Date: Jul 2002 Location: Lindsay, TX Posts: 1,245	ouch.......... No air ride for me, mebbe when Im outta college and makin $$$. __________________ 68 Chevy 383/350 w/shift kit, 380hp/425ft-lbs, 4.5/5 drop, 17" TT2s 64 Cadillac Sedan DeVille

11-18-2003, 03:32 PM	#5
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,066	Pat, were you wanting to do a 4 or 2 wheel system? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

11-19-2003, 03:37 AM	#6
pat Senior Member Join Date: Jul 2002 Location: Lindsay, TX Posts: 1,245	Four, if I were to do it. __________________ 68 Chevy 383/350 w/shift kit, 380hp/425ft-lbs, 4.5/5 drop, 17" TT2s 64 Cadillac Sedan DeVille

11-18-2003, 11:07 AM	#2
Izzy Trucker. Join Date: Nov 2002 Location: Fort Worth, TX Posts: 1,364	$1500 at a bare minimum and that will be a 2 path system with probably 1 compressor and 1 tank.

11-19-2003, 01:23 PM	#7
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	I did mine for a little over $500...and this was on a 16Yr-old budget I am running firestone bags, airride technologies brackets, 4 SMC 3/8 electric solenoids, 6 gallon tank, Viair 325C compressor. No notch or drop spindles yet. If you buy everything seperatly you can save yourself quite a bit of money. By the way, the 2-path systems work great as long as you have a sway bar on your truck, i've driven mine with no troubles for quite some time with a sway bar in front and a 2-path system. Kenny __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon Last edited by PrimeredThunder; 11-19-2003 at 01:26 PM.

11-19-2003, 03:33 PM	#8
loweredd www.loweredd.com Join Date: Aug 2002 Location: Struble IA Posts: 808	I think I have a little under $800 in mine too. 2600 Firestones at all 4 corners, 1/2 fill valves, 3/8 SMC dumps, ViAir 450C comp. 5 gallon airride tank, 1/2 push-loc line, it is a 4 way system. If you check out forums, and ebay, and get components individually, you can get it done for cheap. I got the 1/2 fill valves for $110 shipped cause a guy on S10forum got a set for his birthday and didnt need them. You can always find someone that needs to sell air components cause they need the scratch.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.