PA wtb heater box part

[midniteblues]

ok i've taken a break from doing body work for a bit an figured i get some smaller parts ready i tore down my inner heater box to blast an paint an in doing so i found this valve/flapper to be in pretty rough shape it looks to be melted.
so instead of driving to the jy i figured i would ask here if somebody had one layin around heres the pic of what i'm looking for granted i dont need the box or the rod/shaft just the flapper

also if the same person has a good working heater resistor i would be intrested in it also.

both these parts would be practicaly free at the jy. but i figured gas and time compared too shipping(within a resonable distance) an price that i would ask here first.

lmk an shipping would be too 19559....................................thank you

[midniteblues]

anybody have any trashed rusted out junk inner heater boxes layin around? perhaps you fella's that replaced the oe stuff with aftermarket?

[gdavis]

I have three of them. I go and look and see if the flopper is in good shape. I am putting a under the dash ac and heater so I do not need them.

I looked and one is in good shape 20.00 plus ride

[Bhelton]

I have inner and outter heater boxes from my 72 AC cab that are in good shape
Posted via Mobile Device

[gdavis]

heater box

[midniteblues]

Originally Posted by gdavis

I have three of them. I go and look and see if the flopper is in good shape. I am putting a under the dash ac and heater so I do not need them.

I looked and one is in good shape 20.00 plus ride

thanks g you got the right peice but i only need the flapper(and the resistor but dont mind buying that new if i have too) the rest of my stuff is in great shape blasted an painted but thats more than i wanna spend for such a common part

Originally Posted by Bhelton

I have inner and outter heater boxes from my 72 AC cab that are in good shape
Posted via Mobile Device

i'm only looking n for the flapper/valve if you dont mind smacking it out(if its the same) also i'm not 100% sure if 72's are the same dont they have plastic heater boxes?(idk thats why im askin)

[gdavis]

Originally Posted by midniteblues

thanks g you got the right peice but i only need the flapper(and the resistor but dont mind buying that new if i have too) the rest of my stuff is in great shape blasted an painted but thats more than i wanna spend for such a common part



i'm only looking n for the flapper/valve if you dont mind smacking it out(if its the same) also i'm not 100% sure if 72's are the same dont they have plastic heater boxes?(idk thats why im askin)

I take it apart and 12.00 ship then gdavis

[midniteblues]

Originally Posted by gdavis

I take it apart and 12.00 ship then gdavis

um did you say $12 "shipped" if so i'll take it an send me a pm wit payment info. otherwise i could see a shipping charge coming thats reaching over my limit.

i would just go up to the jy to get one but time is not on my side lately