|
06-22-2013, 05:37 PM
|
#1 |
|
Active Member
 Join Date: Apr 2013
Location: Saskatoon, Sask
Posts: 193
|
1972 Jimmy Rear Seat
I just purchased a 72 Jimmy i took the rear seat out to see the condition of the floor.The seat was held in place with 2 -3/8 bolts attached to the sheetmetal there were no seatbelts or any other holes or frame support Does anyone have pictures or links to information for the proper installation. Thanks
Last edited by chewysask; 06-22-2013 at 05:50 PM. |
|
|
|
06-22-2013, 08:51 PM
|
#2 |
|
Registered User
Join Date: Jun 2006
Location: Fort McMurray, Alberta
Posts: 52
|
Re: 1972 Jimmy Rear Seat
factory installation should have 4 "L" shaped brackets on the back that have 3/8" captured nuts welded to the floor. The front should have 2 support rails and locking tabs that bolt to floor. The seatbelts bolt to the rear seat brackets.
I dont have any current pics but just search on google for fastst results 
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
