Fastest small tire/ radial truck?

[70shortwide]

So me and my buddy were talking the other day about the fastest small tire/radial truck. His truck has ran a best of 5.25 @ 136 in the 1/8 on a 315/60r15 mickey thompson radial. Does anybody know of a faster truck? obviously there are pro mod trucks out there but were talking about door slammer, no wheelie bars, stock chassis, mostly steel bodies (fiberglass hood), on a 10.5 slick or radial. Just curious.

[Super73]

Originally Posted by 70shortwide

So me and my buddy were talking the other day about the fastest small tire/radial truck. His truck has ran a best of 5.25 @ 136 in the 1/8 on a 315/60r15 mickey thompson radial. Does anybody know of a faster truck? obviously there are pro mod trucks out there but were talking about door slammer, no wheelie bars, stock chassis, mostly steel bodies (fiberglass hood), on a 10.5 slick or radial. Just curious.

Everyone's perception of small tire is different. We are having this discussion on one of my local boards now. They say anything bigger than a 28x10.5 non w is a big tire, so a 29.5x10.5 non w is considered a big tire by their standards. So with that a 315/60/15 would be a big tire being 30" tall.


Mind telling us a little about the truck? Is it a full size or Luv/S10?
Posted via Mobile Device

[kpeztruck]

I'm curious as to what kind of truck as well. Is it still stock type suspension? I guess at the end of the year, and if I have any remaining money, I will have to try to turn mine up a little. I am curious as to where the bar is set as well.
Posted via Mobile Device

[70shortwide]

The slick he runs is a 29.5x10.5s. In my opinion the size of the radial doesn't matter cause that puts it into the radial tire category. Around here small tire is considered 10.5 wide diameter doesn't seem to matter. The truck itself is a 67 Chevy short wide stock frame rails that have been boxed. The front suspension is all custom tubular and the rear suspension is custom trailing arms. Truck has coilovers all around. The truck currently has a steel block 604 with a power glide and a fab 9". Current weight is about 3450 but he is getting an aluminum block to get him closer to 3300 where the class weight is. I will try to post some pics of it later. He's hopin with the new weight and some more tuning he can get close to a 5.0's.
Posted via Mobile Device

[hotrod 80]

Originally Posted by Super73

Everyone's perception of small tire is different. We are having this discussion on one of my local boards now. They say anything bigger than a 28x10.5 non w is a big tire, so a 29.5x10.5 non w is considered a big tire by their standards. So with that a 315/60/15 would be a big tire being 30" tall.


Mind telling us a little about the truck? Is it a full size or Luv/S10?
Posted via Mobile Device

Hey , dont be hattin on us Luv truck guys LoL . After this season is over ( 5 more races ) im gonna spray mine right out of the gate with 250 . I am currently 16 fastest truck in Houston on a 275 with a 165 shot . It has a ton more in it . I fit the requirements of small tire 28 x 10.5 , stock suspension . I am also tagged , inspected and on pump gas .

[Super73]

Truck sounds cool, would love to see some pics.

Correct me if I am wrong, but aren't there different radial catagories? Something like 275 or smaller and 285 and bigger?

Just confused a bit, in the beginning you mention "5.25 @ 136 in the 1/8 on a 315/60r15 mickey thompson radial" but then you mention a 29.5x10.5 slick.

I run a 315/60/15 MT DR which is technically bigger at the starting line 1.7" of extra tread width but basically same overall roll out, at least until the big end when the slick grows.
Posted via Mobile Device

[Super73]

Settle down there Hotrod wasn't hating at all. Was just wondering
Posted via Mobile Device

[70shortwide]

well around here there is a x275 class at some races but most are just radial classes with no size. He made the 5.25 pass on the 315/60/15 radial. His fastest slick pass was I think 5.32

[Super73]

Don't know if I will get mine to a 5.2-5.3 but I am shooting for somewhere in the 5.5x range.
Posted via Mobile Device

[kpeztruck]

That is moving out for sure, especially on a stock type suspension. I guess I have something to shoot for at the end of the year. I'll have to do it on 28x10.5 tires that M&H, and Coker tires provides for me. I would like to see some photos of this truck, sounds like a bad hay hauler!
Posted via Mobile Device

[Tnjcurtis]

Not the fastest but all steel, stock suspension and all motor ran 8.11 @ 123mph in 1000" on 275!60
Posted via Mobile Device

[funnyfarmracer]

Originally Posted by hotrod 80

Hey , dont be hattin on us Luv truck guys LoL . After this season is over ( 5 more races ) im gonna spray mine right out of the gate with 250 . I am currently 16 fastest truck in Houston on a 275 with a 165 shot . It has a ton more in it . I fit the requirements of small tire 28 x 10.5 , stock suspension . I am also tagged , inspected and on pump gas .

Where can I find this list?? I am always looking to play....

[hotrod 80]

Originally Posted by funnyfarmracer

Where can I find this list?? I am always looking to play....

Houston performance trucks

http://houstonperformancetrucks.com/

[Super73]

Hotrod, some of those times/mph are just plain look funky. Some of them either didn't hook or lifted. Examples:

8. VMAX2005 ------- 10.06@119 (lifted or out of gear?)
10. EBER ---------------- 10.17@139 (didn't 60' that great?)

Vmax's time reminds me of my bottle pass in my sig. I lifted just after the 1/8 due to valve train issues.


I say both the above have more in their combos.


Posted via Mobile Device

[Bad70sbchevy]

I'm thinking their cage wasn't approved for sub 10 second passes.

[hotrod 80]

Originally Posted by Super73

Hotrod, some of those times/mph are just plain look funky. Some of them either didn't hook or lifted. Examples:

8. VMAX2005 ------- 10.06@119 (lifted or out of gear?)
10. EBER ---------------- 10.17@139 (didn't 60' that great?)

Vmax's time reminds me of my bottle pass in my sig. I lifted just after the 1/8 due to valve train issues.


I say both the above have more in their combos.


Posted via Mobile Device

I actually know Eber . He owns SXT performance in San leon , Texas and does my tuner type work for me . His was a turbo deal that they didnt have sorted out and it spun on drag radials pretty bad .

[70shortwide]

The truck made a new fastest pass of 5.07@139. He tried to shoot for a 4.9x on the next pass and it did this wheelie.

[71Dragtruck]

Ouch, hope he didn't damage a lot of stuff when it came down.

[70shortwide]

it bent the upper shock towers a little but not bad. he was able to peddle it back down then it lifted again about 300' when he got back in it and still ran a 5.30

[Captainfab]

Whoa that's some serious air......all 4

[familyfast64]

Epic!

[ghinmi]

Bobby Flippin has been 4's on a a 275 radial. Stock suspension leaf spring S10.

Bobby flippin x275 4.84 - YouTube

[moggey01]

Originally Posted by 70shortwide

The truck made a new fastest pass of 5.07@139. He tried to shoot for a 4.9x on the next pass and it did this wheelie.

This truck is a bad jose. Think he was shooting for the moon . 5.0s is stout . Congrats

[moggey01]

Lol funny story here. My buddy did the engine in this truck. I heard it is for sale.

[70shortwide]

He had TRE build it this last time and yes it is for sale. Any takers?!?!?!