More progress..... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FuelCellGuy · 12-04-2003, 10:13 AM

The motor mounts are regular run of the mill Chevy mounts with the steel strap that is integrated to the mount. The steel strap keeps the engine from pulling up during acceleration in the event of a broken mount. The part number is DOAN 2283. I used 2" x 1/4" strap, welded to the frame in a triangulated fashion, for the frame mounts. Yes, that is a York compressor for the air ride. No more waiting.

Any more questions, just shoot away. Later, FCG

12-04-2003, 10:13 AM	#18
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Mounts and misc.... The motor mounts are regular run of the mill Chevy mounts with the steel strap that is integrated to the mount. The steel strap keeps the engine from pulling up during acceleration in the event of a broken mount. The part number is DOAN 2283. I used 2" x 1/4" strap, welded to the frame in a triangulated fashion, for the frame mounts. Yes, that is a York compressor for the air ride. No more waiting. Any more questions, just shoot away. Later, FCG

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.