Post those wheels gallery - Page 17 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

demian5 · 02-02-2018, 11:58 AM

Quote:

Originally Posted by knomadd

As they say, you get what you pay for. Cheap wheels are cheap for a reason.

Often it is because it is a popular style, made of cast aluminum, and they are on every other truck at a show...

harpo231 · 01-25-2018, 07:28 PM

Chrome reverse and babie moons ... those were the days !

**Boog** · 01-25-2018, 10:02 PM

Hell yeah! My first custom wheels were chrome reverse and baby moons with red line Goodyears. I think chrome plating was much better in those days too.

del4fun · 02-02-2018, 11:16 AM

Any other Bonspeed wheels?

808_67C10 · 02-02-2018, 04:43 PM

Quote:

Originally Posted by del4fun

Any other Bonspeed wheels?

Here is a better pic if the Bonspeed billets I had on my 67. They were 20x10 all around and I had to run a 1.5" spacer in the rear because of the shorter 67 rear axle. I hate coming up..... short

Theboatandcarman · 02-02-2018, 10:30 PM

Finally sucked it up and picked something. I went with the out of usual options so bear with me lol
Vision wheels 388 shadow 20x9 and 20x10
Bridgestone potenza run flats up front, nitto nt555g2 rear
275/40r20
295/40r20

Jake1074 · 02-15-2018, 02:36 PM

Please pardon me for being a noob - but after reading this thread I haven't been able to figure out what size wheels and tires will fit and function on my stock height '67.

Your guidance is much appreciated...

67ChevNut · 02-19-2018, 03:34 PM

Looks nice, what kind of drop u have, and how it was done?

Faastone27 · 02-19-2018, 03:43 PM

Quote:

Originally Posted by 67ChevNut

Looks nice, what kind of drop u have, and how it was done?

Thank You! Up front i have 2.5 drop spindles and 2" shorter springs, In back i have 5" drop springs and 1" lowering block with 2% pinion adjustment shims. along with full length panard bar and shock relocation kit i also cut the rubber stops some as to not hit and so far it seems fine. but future will call for C notch probably

mike16 · 03-15-2018, 01:31 AM

Very sexy rims. so good looking I'm looking for more too bad I can only have the five of them on my truck at any one time, but there's room in the bed for more

88gtstreetrod · 05-02-2018, 09:30 PM

Thanks Duane for the feedback. It's a fleet side and and everything is stock except of the lowering. From what I can tell, a 20x9 with 5.5 backspacing and a 8.5 width in the front should work. I will check out the site. Thank you.

JRracing · 05-03-2018, 10:22 PM

I have some wheels being made right now at a place in cali, Pro wheels is the company I think. These will be either a big hit or a big flop. 22x10 5.5 bs/20x8.5 4.75 bs.
They are going on a 68 sbss. We have been poking at for over 10 years. Its a frame off build.

We should have the wheels in 3 weeks. I will post them once they are mounted up.

JRracing · 05-29-2018, 08:17 PM

Damit...I got pics but having a hard time getting them on photobucket. Were else can i download these? There is only a few.

Southpaw69 · 05-29-2018, 08:24 PM

just upload them here. Click the little paper clip and browse and select file.

JRracing · 05-29-2018, 09:16 PM

Quote:

Originally Posted by Southpaw69

just upload them here. Click the little paper clip and browse and select file.

Thank you. I finally got photobucket to work.

JRracing · 05-29-2018, 08:36 PM

These were just put on this week. So adjustments on the way. Lowering the rear 2". Also considering cutting this rearend 1" off each side and doing disc brakes and a posi unit.

We are rushing to finish this up for the HotRod power tour which starts next Saturday in Bowling green KY.

JRracing · 05-29-2018, 09:11 PM

This is my 59 apache with a set of wheel vintique truck wheels. 15x8/15x7 235/75/15 coker 3" white walls.

Grandview · 05-29-2018, 09:21 PM

17x9.5

vt05091 · 05-30-2018, 01:07 AM

Old school:

JRracing · 05-30-2018, 10:28 AM

Thanks BC10

Murph72 · 05-30-2018, 06:22 PM

Posted via Mobile Device

Faastone27 · 05-31-2018, 08:33 AM

Here are my Boze Vintage Wheels 22X10.5 and 20X9

JRracing · 05-31-2018, 01:31 PM

I love those wheels. Very sharp fleet side.
Are those billet specialty?

Danyo492 · 05-31-2018, 02:29 PM

Boze Forged.

They make an awesome wheel. Beautiful truck! Good to see a fellow Georgian on here, I'm out in Decatur!

rjs53 · 05-31-2018, 09:19 PM

Quote:

Originally Posted by danielgserrano

Boze Forged.

They make an awesome wheel. Beautiful truck! Good to see a fellow Georgian on here, I'm out in Decatur!

Is your truck bagged or static dropped/what drop?

01-25-2018, 07:28 PM	#2
harpo231 Registered User Join Date: Nov 2014 Location: Lincoln City DE Posts: 1,292	Re: Post those wheels gallery Chrome reverse and babie moons ... those were the days ! __________________ Stan 67 swb BLU MULE posted via flip-fone

01-25-2018, 10:02 PM	#3
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,666	Re: Post those wheels gallery Hell yeah! My first custom wheels were chrome reverse and baby moons with red line Goodyears. I think chrome plating was much better in those days too. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

02-02-2018, 11:16 AM	#4
del4fun Registered User Join Date: Nov 2011 Location: Vacaville, California Posts: 215	Re: Post those wheels gallery Any other Bonspeed wheels? __________________ US ARMY RET, SUPPORT THE TROOPS 1972 Custom/10 Short Fleet 4.5/ 5 Drop Dogg Pound Customs

02-02-2018, 10:30 PM	#6
Theboatandcarman Registered User Join Date: Aug 2015 Location: Harleysville, PA Posts: 398	Re: Post those wheels gallery Finally sucked it up and picked something. I went with the out of usual options so bear with me lol Vision wheels 388 shadow 20x9 and 20x10 Bridgestone potenza run flats up front, nitto nt555g2 rear 275/40r20 295/40r20 Attached Images __________________ keep on building. http://67-72chevytrucks.com/vboard/s...d.php?t=680094 2017 GMC Canyon diesel 1968 Chevrolet C20 1970 Mercedes 280S (WTB 1968 4wd barn door suburban)

02-15-2018, 02:36 PM	#7
Jake1074 Registered User Join Date: Jan 2018 Location: Saluda, NC Posts: 87	Re: Post those wheels gallery Please pardon me for being a noob - but after reading this thread I haven't been able to figure out what size wheels and tires will fit and function on my stock height '67. Your guidance is much appreciated...

02-19-2018, 03:34 PM	#8
67ChevNut Registered User Join Date: Mar 2009 Location: Eagle Pass, Posts: 195	Re: Post those wheels gallery Looks nice, what kind of drop u have, and how it was done?

03-15-2018, 01:31 AM	#10
mike16 Registered User Join Date: Dec 2009 Location: bisbee, arizona Posts: 1,530	Re: Post those wheels gallery Very sexy rims. so good looking I'm looking for more too bad I can only have the five of them on my truck at any one time, but there's room in the bed for more Attached Images

05-02-2018, 09:30 PM	#11
88gtstreetrod Registered User Join Date: May 2018 Location: Atlanta, GA Posts: 45	Re: Post those wheels gallery Thanks Duane for the feedback. It's a fleet side and and everything is stock except of the lowering. From what I can tell, a 20x9 with 5.5 backspacing and a 8.5 width in the front should work. I will check out the site. Thank you.

05-03-2018, 10:22 PM	#12
JRracing Registered User Join Date: Jan 2007 Location: Indpls, IN Posts: 50	Re: Post those wheels gallery I have some wheels being made right now at a place in cali, Pro wheels is the company I think. These will be either a big hit or a big flop. 22x10 5.5 bs/20x8.5 4.75 bs. They are going on a 68 sbss. We have been poking at for over 10 years. Its a frame off build. We should have the wheels in 3 weeks. I will post them once they are mounted up. __________________ 59 apache sbss. 68 sbss. 57 belair"old man car".

05-29-2018, 08:17 PM	#13
JRracing Registered User Join Date: Jan 2007 Location: Indpls, IN Posts: 50	Re: Post those wheels gallery Damit...I got pics but having a hard time getting them on photobucket. Were else can i download these? There is only a few. __________________ 59 apache sbss. 68 sbss. 57 belair"old man car".

05-29-2018, 08:24 PM	#14
Southpaw69 Registered User Join Date: Jan 2018 Location: Modesto, CA Posts: 92	Re: Post those wheels gallery just upload them here. Click the little paper clip and browse and select file.

05-29-2018, 08:36 PM	#16
JRracing Registered User Join Date: Jan 2007 Location: Indpls, IN Posts: 50	Re: Post those wheels gallery These were just put on this week. So adjustments on the way. Lowering the rear 2". Also considering cutting this rearend 1" off each side and doing disc brakes and a posi unit. We are rushing to finish this up for the HotRod power tour which starts next Saturday in Bowling green KY. __________________ 59 apache sbss. 68 sbss. 57 belair"old man car".

05-29-2018, 09:11 PM	#17
JRracing Registered User Join Date: Jan 2007 Location: Indpls, IN Posts: 50	Re: Post those wheels gallery This is my 59 apache with a set of wheel vintique truck wheels. 15x8/15x7 235/75/15 coker 3" white walls. __________________ 59 apache sbss. 68 sbss. 57 belair"old man car".

05-29-2018, 09:21 PM	#18
Grandview Registered User Join Date: Sep 2017 Location: Grandview Tn Posts: 11	Re: Post those wheels gallery 17x9.5 Attached Images

05-30-2018, 01:07 AM	#19
vt05091 Registered User Join Date: Nov 2003 Location: SF Bay Area Posts: 45	Re: Post those wheels gallery Old school: Attached Images



Register or Log In To remove these advertisements.

05-30-2018, 10:28 AM	#20
JRracing Registered User Join Date: Jan 2007 Location: Indpls, IN Posts: 50	Re: Post those wheels gallery Thanks BC10 __________________ 59 apache sbss. 68 sbss. 57 belair"old man car".

05-30-2018, 06:22 PM	#21
Murph72 Registered User Join Date: Nov 2013 Location: goshen IN Posts: 2	Re: Post those wheels gallery Posted via Mobile Device

05-31-2018, 08:33 AM	#22
Faastone27 Registered User Join Date: Nov 2017 Location: Johns Creek Georgia Posts: 64	Re: Post those wheels gallery Here are my Boze Vintage Wheels 22X10.5 and 20X9

05-31-2018, 01:31 PM	#23
JRracing Registered User Join Date: Jan 2007 Location: Indpls, IN Posts: 50	Re: Post those wheels gallery I love those wheels. Very sharp fleet side. Are those billet specialty? __________________ 59 apache sbss. 68 sbss. 57 belair"old man car".

05-31-2018, 02:29 PM	#24
Danyo492 Registered User Join Date: Feb 2015 Location: Atlanta, GA Posts: 38	Re: Post those wheels gallery Boze Forged. They make an awesome wheel. Beautiful truck! Good to see a fellow Georgian on here, I'm out in Decatur!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.