Tires and Rim sizes are you Guy's running with the Camaro Clip on 55 56 57 Chevy P/U

[Cobra427sc]

Hey Guy's tiring to figure out what sizes of tires I can use that will fit my 56 Chevy P/U Truck, with the 1980's Camaro front clip change.
The rear end is a 10 bolt from a 80's Camaro at 62.50"in width.

Also it would help if I knew your rear suspension setup, as I'm using a 4 link Triangulated with Coil Over Shocks.

I would like to know if your setup is tubed or not.
Thanks for the Help Guy's.
Reg.
Cobra427sc.

[1adam12]

Cobra
I'm running 18x8 with 4.5 backspace. 245/45/18 tires. No tub 10 bolt axle with it flipped and c notched.
Hope this helps.

[Cobra427sc]

Originally Posted by 1adam12

Cobra
I'm running 18x8 with 4.5 backspace. 245/45/18 tires. No tub 10 bolt axle with it flipped and c notched.
Hope this helps.

Hey 1adam12!
Got a picture of her???
Is that 18x8 at 4.5 BS all the way around?
Also the 10 bolt is it a Camaro rear end?
Thanks Buddy.
Cobra427sc.

[1adam12]

All 18x8 4.5 backspace..yes its a camaro rear end 10 bolt here is a pic hope these help i can send more

[1adam12]

Here are a couple more

[Dan in Pasadena]

Very nice truck! I'm in a neverending argument with myself over ifs or a dropped axle, Posie's Super Sliders, rebuilt kingpins, etc. yeah, I know I'd have nearly as much $$ tied up if I go that way and it won't ride as well but I kinda like the idea of improved originality. Kinda like the street rid guys do with 30's Fords.

Anyway, is your truck a static drop or bagged? Any rubbing issues on turns, entering driveways! Personally, I'm waay over the entering diagonally phase of my life. I want it lower without that BS.

[1adam12]

Dan
Static drop left side will rub a bit in tight turns I have to trim the fender a bit..She rides ok...I don't scrap at all..when i first got here the rear end was hitting the frame so I notched it..so far so good...I have a front clip problem i think the PO installed it wrong so this winter i will be addressing that issue.its getting there Slowly....

[Cobra427sc]

Originally Posted by 1adam12

All 18x8 4.5 backspace..yes its a camaro rear end 10 bolt here is a pic hope these help i can send more

Hey 1adam12!! Sweet!!

[Cobra427sc]

Originally Posted by Cobra427sc

Hey Guy's tiring to figure out what sizes of tires I can use that will fit my 56 Chevy P/U Truck, with the 1980's Camaro front clip change.
The rear end is a 10 bolt from a 80's Camaro at 62.50"in width.

Also it would help if I knew your rear suspension setup, as I'm using a 4 link Triangulated with Coil Over Shocks.

I would like to know if your setup is tubed or not.
Thanks for the Help Guy's.
Reg.
Cobra427sc.

Someone is offering me a good price for Mags. I just don't know if the will fit these trucks. This is what the dimensions of the Mags he's got, I would prefer not to have to tub my box.
What would be the out come if I bought these??
Front wheel are 15x8 (BS) 4 1/2 The rear wheel are 15x10 (BS) 4”

All info would help!!
Thanks.
Cobra427sc.

[Cobra427sc]

Originally Posted by 1adam12

Here are a couple more

That's just Sweet 1adam12!!

[1adam12]

Cobra
With my 18x8 I have bout an inv h give or take on each side of rear fender. Hope this helps.
Thanks for the props on my truck. Let me see if I can find some pics of the rear.