How much space between cab and frame? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Scrub · 12-21-2003, 08:09 PM

I am building custom mounts for my divorced t-case. I have a crossmember made from a piece of 6 x 2 steel tube. I would really like to bolt it on top of the frame and under the cab. How much space is there? do I have 2 inches or would I need a body lift to get the 2 inches

Thanks in adance

**Stocker** · 12-22-2003, 12:19 PM

I measured just over an inch in most places, and about 7/8" where the rib runs across the cab.

Scrub · 12-23-2003, 01:00 PM

Hey,

Thanks for doing that for me.

I guess I need to mount it inside the frame. Crud

12-21-2003, 08:09 PM	#1
Scrub Collector of rusty Items Join Date: Dec 2001 Location: Sisters,Oregon USA Posts: 731	How much space between cab and frame? I am building custom mounts for my divorced t-case. I have a crossmember made from a piece of 6 x 2 steel tube. I would really like to bolt it on top of the frame and under the cab. How much space is there? do I have 2 inches or would I need a body lift to get the 2 inches Thanks in adance __________________ Scrub Sisters, Oregon - Home of the Sisters Rodeo. 70 GMC 1,000,000 + miles 72 K-20 project, 456 Dana60 front, Corp14 rear w/locker, 265R19.5 tires 20-ply. Warn 12k winches both ends, Cross-over steering with raised tie-rod, Powerbox steering, 4500 watt 120-AC power, Air, Hydraulic aux power, 4 inch lift, 5000 lb air-bags both ends.

12-22-2003, 12:19 PM	#2
Stocker 20' Daredevil (Ret) Join Date: May 2003 Location: Jefferson State Posts: 13,768	I measured just over an inch in most places, and about 7/8" where the rib runs across the cab. __________________ - Mike - 1972 K20 LWB 350/350/205 RIP El Jay

12-23-2003, 01:00 PM	#3
Scrub Collector of rusty Items Join Date: Dec 2001 Location: Sisters,Oregon USA Posts: 731	Hey, Thanks for doing that for me. I guess I need to mount it inside the frame. Crud __________________ Scrub Sisters, Oregon - Home of the Sisters Rodeo. 70 GMC 1,000,000 + miles 72 K-20 project, 456 Dana60 front, Corp14 rear w/locker, 265R19.5 tires 20-ply. Warn 12k winches both ends, Cross-over steering with raised tie-rod, Powerbox steering, 4500 watt 120-AC power, Air, Hydraulic aux power, 4 inch lift, 5000 lb air-bags both ends.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.