|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
02-03-2014, 09:17 PM
|
#17 |
|
BMW & ASE Master Certified
Join Date: Feb 2004
Location: Houston, Texas
Posts: 1,266
|
Re: Cool air in 73-74 model engine bay
I did dual intake air box out of some 4" flexible drier vent tubing and plastic gutter drain adapter.. Riveted it to my air box once I cut it and shaped it to fit the factory cleaner... Basically replicated ramair box but without spending 300$. The other end if the drier vent went to the factory plastic round adapter in the core support with the front face either removed or holes drilled in it.
 I couldn't use the setup with the 90 suburban clip as it doesn't have those holes.
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes 1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD A poor man buy's it twice finally got my domain name back, 87chevy.com.... site rework in progress |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode