![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#3 |
Registered User
![]() Join Date: Feb 2014
Location: Glen St. Mary, Florida
Posts: 304
|
Re: 1984 Chevy wiper issue not the switch!! read inside.
Yes , just as old Rusty C10 stated, you can purchase the turn signal lever with the wiper and cruise control at any of the major auto parts stores.
Just some advise when replacing this arm if you have cruise control. The wire sits in a small channel in the steering column and to change this out you pull the lever out of the turn signal cam assembly and then just pull the wire out. Here is where I would like to offer some advise. Before you pull the wire out, if you look at the end of the connector there is a small hole. Attach a pull wire to the connector through this hole. While pulling out the old cruise control wire feed your pull wire up in the column. Once the old wire is out, attach the pull wire to the new control wire and pull it back through the column. This will make the change out go a lot smoother. Hope this helps a little.
__________________
86 Chevrolet K10 350/SM465 Frankie SOLD 1995 GMC Yukon GT SOLD 1996 GMC Yukon GT 2010 Suburban 1500 4x4 5.3l/6L80e. Sold 2016 Silverado 2500HD Crew Cab 4x4 6.0l/6L80e |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|