|
02-24-2014, 03:28 PM
|
#9 |
|
Registered User
Join Date: Jul 2011
Location: WV
Posts: 946
|
Re: Any tips?
If youuse the easy out, get one thats straight, not the spiral ones. They have a tendency to tighten the bolt against the hole. Otherwise, I would remove anything that I needed to, weld a washer to the remains of the bolt, then weld a nut to the washer. Rub sum candle wax on anything as close to the threads as I could. Let cool and use an impact wrench SET ON VERY LOW SETTING. Just enough to make some noise, but not anywhere near its torque potential.
__________________
72 GMC C2500 402/Th400 first truck (still have) 77 GMC C3500 CC dually Sold  70 C50 dump truck "Rusty" 87 K10 Suburban Sold 93 K2500 xcab 6.5TD 96 GMC K2500 Suburban 6.5 TD |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode