rear roll pan pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71chevylongbed · 12-27-2003, 07:50 PM

anyone have pics of a 67-72 longbed with a 2/4 drop and 10 inch wide wheels with a rear roll pan

BowTieMan · 12-27-2003, 08:08 PM

Somebody on here has I think exactly what your looking for. Its a red truck but I dont know his name. Here is the closest picture I have. May help a little.

BowTieMan · 12-27-2003, 08:21 PM

I think this is a little lower then a 2/4 but may help.

FRENCHBLUE72 · 12-27-2003, 08:26 PM

here's one??

FRENCHBLUE72 · 12-27-2003, 08:31 PM

yellow one..

71chevylongbed · 12-27-2003, 08:47 PM

thanks those help alot

pissonNOS · 12-28-2003, 10:10 PM

where do you geta roll pan liek that with the lip on the bottom I can only find flush ones in canada?

D-Money · 12-29-2003, 04:26 AM

Heres another pic

Injected68LS1 · 12-29-2003, 05:40 AM

I like this post. I just browse though and I get to see my own truck(the red one). Cool. Thanks D-Money. Now I don't have to post it myself.

REDNEKID · 12-30-2003, 04:51 PM

Wow, someone used a pic of my truck for something. I feel special now. Thanks Brad!!!
Here is a better pic from the back...

12-27-2003, 07:50 PM	#1
71chevylongbed Got Horsepower? Join Date: Sep 2003 Location: IDAHO Posts: 406	rear roll pan pics anyone have pics of a 67-72 longbed with a 2/4 drop and 10 inch wide wheels with a rear roll pan __________________ 2001 Dodge 2500 Cummins, 4 inch lift, 35" Toyo MT's on Ultra wheels, P-Pump Conversion, AFE intake, Fass, 5 inch exhaust, Pyro,Boost,and Fuel pressure guages, and a whole bunch of other stuff "The Money Pit" SOLD-71 Chevy C10 long bed- 2/4 drop-- 350,th400, Edelbrock performer RPM intake,Edelbrock 600 CFM carb,Crower 240 cam,port and polish,Dynomax headers,HEI ignition,dual 2.5 inch exhaust with Flowmaster 50 series mufflers Last edited by 71chevylongbed; 12-27-2003 at 07:56 PM.

12-27-2003, 08:08 PM	#2
BowTieMan Registered User Join Date: Dec 2003 Location: Glendale Arizona Posts: 747	Somebody on here has I think exactly what your looking for. Its a red truck but I dont know his name. Here is the closest picture I have. May help a little. Attached Images __________________ "A true hotrodder wouldn't be content untill he had created a car so violent, so hairy, so totally sick that the very act of dropping the hammer would result in instant death. Anything less results in the need to go faster." - Tony DeFeo

12-27-2003, 08:21 PM	#3
BowTieMan Registered User Join Date: Dec 2003 Location: Glendale Arizona Posts: 747	I think this is a little lower then a 2/4 but may help. Attached Images __________________ "A true hotrodder wouldn't be content untill he had created a car so violent, so hairy, so totally sick that the very act of dropping the hammer would result in instant death. Anything less results in the need to go faster." - Tony DeFeo

12-27-2003, 08:26 PM	#4
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	here's one?? Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-27-2003, 08:31 PM	#5
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	yellow one.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-27-2003, 08:47 PM	#6
71chevylongbed Got Horsepower? Join Date: Sep 2003 Location: IDAHO Posts: 406	thanks those help alot __________________ 2001 Dodge 2500 Cummins, 4 inch lift, 35" Toyo MT's on Ultra wheels, P-Pump Conversion, AFE intake, Fass, 5 inch exhaust, Pyro,Boost,and Fuel pressure guages, and a whole bunch of other stuff "The Money Pit" SOLD-71 Chevy C10 long bed- 2/4 drop-- 350,th400, Edelbrock performer RPM intake,Edelbrock 600 CFM carb,Crower 240 cam,port and polish,Dynomax headers,HEI ignition,dual 2.5 inch exhaust with Flowmaster 50 series mufflers

12-28-2003, 10:10 PM	#7
pissonNOS senior member Join Date: Feb 2003 Location: fort macleod alberta Posts: 2,770	where do you geta roll pan liek that with the lip on the bottom I can only find flush ones in canada? __________________ 69 GMC bagged

12-29-2003, 04:26 AM	#8
D-Money Registered User Join Date: Dec 2003 Location: CA Posts: 315	Heres another pic Attached Images __________________ 1969 Chevy SB Truck under construction hopefully will be done early next year! Will be posting pics soon.

12-29-2003, 05:40 AM	#9
Injected68LS1 Registered User Join Date: Jul 2003 Location: So. Cal. Posts: 389	I like this post. I just browse though and I get to see my own truck(the red one). Cool. Thanks D-Money. Now I don't have to post it myself. __________________ 1968 Chev SWB with 1998 Corvette LS1 305hp and 320 ftlb to the wheels (stock engine!) AEM EMS and wideband O2 sensors Bowtie Overdrive's 700R4, stage 3 Baer 4 wheel discs and 20s http://iciclelanding.com/aperture?album=2049&view=album

12-30-2003, 04:51 PM	#10
REDNEKID Who said that? Join Date: Aug 2003 Location: HOUSTON, TX. Posts: 106	Wow, someone used a pic of my truck for something. I feel special now. Thanks Brad!!! Here is a better pic from the back... Attached Images __________________ Founder 4-Wheel Discs Club!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.