1970 Blazer for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

T HAUS · 12-15-2003, 10:47 PM

(I posted this in the parts section too. Check out that thread for more pics.)

Here is what I have:
1970 CST Blazer..... Rust bucket.

All parts are there, but I have it tore down from the firewall forward.
When I bought this rig, I also received a '72 frame with only the front/rear ends. The 72 had appx 4" lift springs on it. I still have the running gear.

No motor in the 70, but I have the 4spd and Dana t-case.

Most parts are good except for the tub, windshield frame, doors.

It has all the glass, double wall hardtop, emblems grille, etc.

I can part out items and/or sell the whole thing for $500.
I have a title for it and I'm located in SW Missouri, south of Joplin.

Let me know if you need pics or have questions about anything.

Edit:
I would be willing to do some trading on parts.
I'm needing :
Holley 650cfm DP
Alum Intake for a 78 Pontiac 400
72 Front bucket seat covers
Door glass to hardtop weatherstripping for 72 single wall
Glove box
Battery box
Arm rests for 72
Chrome bow tie sill plates

Illinois CST · 12-15-2003, 11:27 PM

Hi, do you know what gears the drivetrains have in them, or if either are posi? Thanks, Willie

T HAUS · 12-15-2003, 11:38 PM

The 70 rear is shot (ring and pinion)
70 front is good

I believe both front/rear for the 72 are good, but don't know on the positrac for either.

I can pull the covers and get back to you tomorrow.
Thanks

1970blazin · 12-16-2003, 12:16 AM

You can tell if they are posi or not by just jacking up the wheels and spinning one wheel- if they spin the opposite direction they are regular, and the same direction they are posi- I think-correct me if I am wrong.
Diane

T HAUS · 12-16-2003, 12:57 AM

I have to count the gear teeth anyway, so I'll just pull the covers.

T HAUS · 12-16-2003, 07:34 PM

Illinois- I didn't get a chance to check the ratios today, plus I ran out of room on my camera to get any pics of the front/rears. I did get one pic of the 72 front.

moodyholler · 12-16-2003, 08:12 PM

What kind of pontiac intake are looking for/? My friend has an offy open plenum for sale. moodyholler

moodyholler · 12-16-2003, 08:13 PM

Also what about the spare tire carrier? I need one that mounts behind the rear seat.moodyholler

T HAUS · 12-16-2003, 08:15 PM

nothing too radical I guess. I've got a 400 bored 30 over with a midrange cam in it.
I'd like to run a 600-650 cfm carb on it

sorry bud, no carrier.

GI Blazer · 12-19-2003, 01:50 AM

What shape is the double wall top in? Does is have the rear hatch also? How much you looking at for it?

T HAUS · 12-19-2003, 08:07 PM

GI blazer,

The top is in pretty good shape. There is one hole on the driver side near the the window. I have pics of it. The hatch is so-so. It has cracks near the hinges and next to the handle. I will send you some pics and price if you will send me your e-mail address.

T HAUS · 12-30-2003, 09:46 PM

Here is the only pic I have of the 72 rear.

3.07 if I counted right..

Cethern · 12-30-2003, 10:30 PM

What shape are the springs in? is it front and rear or blocks in the back?

Cethern

T HAUS · 12-30-2003, 11:07 PM

Springs are okay I guess. They're rusty, but nothing major. Just surface rust from sitting outside. They will all need new bushings.

The rears are blocked up. I've got one person ahead of you asking for just the fronts.
Thanks

EDIT: A couple posts up show the general condition of the springs

12-15-2003, 10:47 PM	#1
T HAUS Registered User Join Date: Nov 2003 Location: SW Missouri Posts: 111	1970 Blazer/parts for sale (I posted this in the parts section too. Check out that thread for more pics.) Here is what I have: 1970 CST Blazer..... Rust bucket. All parts are there, but I have it tore down from the firewall forward. When I bought this rig, I also received a '72 frame with only the front/rear ends. The 72 had appx 4" lift springs on it. I still have the running gear. No motor in the 70, but I have the 4spd and Dana t-case. Most parts are good except for the tub, windshield frame, doors. It has all the glass, double wall hardtop, emblems grille, etc. I can part out items and/or sell the whole thing for $500. I have a title for it and I'm located in SW Missouri, south of Joplin. Let me know if you need pics or have questions about anything. Edit: I would be willing to do some trading on parts. I'm needing : Holley 650cfm DP Alum Intake for a 78 Pontiac 400 72 Front bucket seat covers Door glass to hardtop weatherstripping for 72 single wall Glove box Battery box Arm rests for 72 Chrome bow tie sill plates __________________ 1966 Chevy C-10 1970 Chevy K-5 Blazer 4x4 1972 Chevy K-5 Blazer 4x4 2003 2500HD GMC Duramax/Allison 4x4 Full 4 Door Last edited by T HAUS; 12-16-2003 at 09:07 PM.

12-15-2003, 11:27 PM	#2
Illinois CST Registered User Join Date: Sep 2003 Location: Venedy, IL Posts: 25	Hi, do you know what gears the drivetrains have in them, or if either are posi? Thanks, Willie __________________ 1970 Blazer CST 350 700R4

12-15-2003, 11:38 PM	#3
T HAUS Registered User Join Date: Nov 2003 Location: SW Missouri Posts: 111	The 70 rear is shot (ring and pinion) 70 front is good I believe both front/rear for the 72 are good, but don't know on the positrac for either. I can pull the covers and get back to you tomorrow. Thanks __________________ 1966 Chevy C-10 1970 Chevy K-5 Blazer 4x4 1972 Chevy K-5 Blazer 4x4 2003 2500HD GMC Duramax/Allison 4x4 Full 4 Door

12-16-2003, 12:16 AM	#4
1970blazin Blazerless:-( Join Date: Jun 2003 Location: Olympia WA Posts: 1,612	You can tell if they are posi or not by just jacking up the wheels and spinning one wheel- if they spin the opposite direction they are regular, and the same direction they are posi- I think-correct me if I am wrong. Diane __________________ 1970blazin 1970 CST Blazer-Orig. Dark Blue-SOLD Progress Pics of Blazer for sale

12-16-2003, 12:57 AM	#5
T HAUS Registered User Join Date: Nov 2003 Location: SW Missouri Posts: 111	I have to count the gear teeth anyway, so I'll just pull the covers. __________________ 1966 Chevy C-10 1970 Chevy K-5 Blazer 4x4 1972 Chevy K-5 Blazer 4x4 2003 2500HD GMC Duramax/Allison 4x4 Full 4 Door

12-16-2003, 07:34 PM	#6
T HAUS Registered User Join Date: Nov 2003 Location: SW Missouri Posts: 111	Illinois- I didn't get a chance to check the ratios today, plus I ran out of room on my camera to get any pics of the front/rears. I did get one pic of the 72 front. Attached Images __________________ 1966 Chevy C-10 1970 Chevy K-5 Blazer 4x4 1972 Chevy K-5 Blazer 4x4 2003 2500HD GMC Duramax/Allison 4x4 Full 4 Door

12-16-2003, 08:12 PM	#7
moodyholler Registered User Join Date: Dec 2003 Location: Roanoke,Virginia Posts: 179	What kind of pontiac intake are looking for/? My friend has an offy open plenum for sale. moodyholler __________________ 1998 WRANGLER I-6 auto 1972 LWB FLEETSIDE 1968 GMC SWB STEPSIDE 1994 C-1500 SWB 4.3 5 SPD

12-16-2003, 08:13 PM	#8
moodyholler Registered User Join Date: Dec 2003 Location: Roanoke,Virginia Posts: 179	Also what about the spare tire carrier? I need one that mounts behind the rear seat.moodyholler __________________ 1998 WRANGLER I-6 auto 1972 LWB FLEETSIDE 1968 GMC SWB STEPSIDE 1994 C-1500 SWB 4.3 5 SPD

12-16-2003, 08:15 PM	#9
T HAUS Registered User Join Date: Nov 2003 Location: SW Missouri Posts: 111	nothing too radical I guess. I've got a 400 bored 30 over with a midrange cam in it. I'd like to run a 600-650 cfm carb on it sorry bud, no carrier. __________________ 1966 Chevy C-10 1970 Chevy K-5 Blazer 4x4 1972 Chevy K-5 Blazer 4x4 2003 2500HD GMC Duramax/Allison 4x4 Full 4 Door

12-19-2003, 01:50 AM	#10
GI Blazer Registered User Join Date: Dec 2003 Location: Tucson Posts: 13	double wall top What shape is the double wall top in? Does is have the rear hatch also? How much you looking at for it? __________________ GT

12-19-2003, 08:07 PM	#11
T HAUS Registered User Join Date: Nov 2003 Location: SW Missouri Posts: 111	GI blazer, The top is in pretty good shape. There is one hole on the driver side near the the window. I have pics of it. The hatch is so-so. It has cracks near the hinges and next to the handle. I will send you some pics and price if you will send me your e-mail address. __________________ 1966 Chevy C-10 1970 Chevy K-5 Blazer 4x4 1972 Chevy K-5 Blazer 4x4 2003 2500HD GMC Duramax/Allison 4x4 Full 4 Door

12-30-2003, 09:46 PM	#12
T HAUS Registered User Join Date: Nov 2003 Location: SW Missouri Posts: 111	Illinois CST Here is the only pic I have of the 72 rear. 3.07 if I counted right.. Attached Images __________________ 1966 Chevy C-10 1970 Chevy K-5 Blazer 4x4 1972 Chevy K-5 Blazer 4x4 2003 2500HD GMC Duramax/Allison 4x4 Full 4 Door

12-30-2003, 10:30 PM	#13
Cethern What was I thinking?? Join Date: Dec 2003 Location: Commerce City Co Posts: 636	What shape are the springs in? is it front and rear or blocks in the back? Cethern

12-30-2003, 11:07 PM	#14
T HAUS Registered User Join Date: Nov 2003 Location: SW Missouri Posts: 111	Springs are okay I guess. They're rusty, but nothing major. Just surface rust from sitting outside. They will all need new bushings. The rears are blocked up. I've got one person ahead of you asking for just the fronts. Thanks EDIT: A couple posts up show the general condition of the springs __________________ 1966 Chevy C-10 1970 Chevy K-5 Blazer 4x4 1972 Chevy K-5 Blazer 4x4 2003 2500HD GMC Duramax/Allison 4x4 Full 4 Door

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.