![]() |
|
![]() |
#1 |
Registered User
Join Date: Jan 2011
Location: Chattanooga, TN
Posts: 2,197
|
Re: TBI engine question
Yes, a TH350 will bolt behind it. You will need a PROM for a manual trans truck instead of a 4L60E or you will get codes. From what I remember, the harness is not easy to separate on a '95. You may be faster to buy an aftermarket harness. Depends on your electrricalk skills and patience. Do keep the flexplate as it is needed for the 1-piece rear seal engine. You can keep all the accessories if you want to go serpentine belt (although I would dump the CS130 alternator for a CS144). If you don't want A/C, you can buy a delete pulley on Ebay or similar.
__________________
'83 K20-TPI '73 C10 '79 C10-ex-diesel(SOLD) '07 Tahoe(Son driving) '14 Suburban-DD '71 C10-current project |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|