u-joint - The 1947 - Present Chevrolet & GMC Truck Message Board Network

'71c204x4454 · 01-06-2004, 03:57 PM

I busted a u-joint in my front axle on my '71 dana44 playing in the snow yesterday and was wondering since i have to get in there if there was anything else I should change/upgrade?

Scrubby · 01-06-2004, 05:53 PM

I just did mine on my '72. I figured while I was in there I would do most of it. Did new ujoints, ball joints, bearings, seals. I even put on new rotors because mine were trashed. Cost me about $300 before I was all done.

01-06-2004, 03:57 PM	#1
'71c204x4454 '71k204x4454 Join Date: Jan 2004 Location: Hood River Or. Posts: 137	u-joint I busted a u-joint in my front axle on my '71 dana44 playing in the snow yesterday and was wondering since i have to get in there if there was anything else I should change/upgrade?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-06-2004, 05:53 PM	#2
Scrubby Check out GMTrucks.org Join Date: Sep 2003 Location: Boise, Id Posts: 284	I just did mine on my '72. I figured while I was in there I would do most of it. Did new ujoints, ball joints, bearings, seals. I even put on new rotors because mine were trashed. Cost me about $300 before I was all done.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.