Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
01-06-2004, 01:00 AM | #1 |
Not a bad nut after all..
Join Date: Dec 2000
Location: ND
Posts: 1,759
|
Removing Sunvisors from Arm--How?
How does a person remove the sunvisors from the arms? Do they just pull off the arms (the side of the arms that clip into the plastic retainers)? I don't want to damage the visors since they are still nice.
Thanks in advance! |
01-06-2004, 01:37 AM | #2 |
Registered User
Join Date: Dec 2002
Location: Canada
Posts: 695
|
I have not had my visors off but I am guessing that they come off the same way that most do. Pull and wiggle them back and forth at the same time. I have pulled other visors off of the arms and put wax on to loosen them up some when they are hard to put up or down. I had a 74 Chevy where they were so tight I ruined the drivers side one and had to get new ones.
__________________
1968 Chevy - 292 with a powerglide |
01-06-2004, 03:06 AM | #3 |
Try spinnin 4 rear tars
Join Date: Sep 2003
Location: Salt Lake City, Utah
Posts: 757
|
just pull and twist. You have to work at it a bit. Oh, and the rod is in 2 pieces!!! Well, mine are anyway. I thought that I wasn't getting them off, but I got the visor off of the mount, but where it sticks out and latches at the center of the cab, you will have to work at it with some pliers.
__________________
SWEET7T 1970 C10, 2wd, LB, 307/TH350/3.08. PS, PB |
01-06-2004, 06:35 PM | #4 |
Navel Inspector
Join Date: Mar 2003
Location: Wichita, Ks
Posts: 1,373
|
This is a pain for sure! I will be tagging along for some hints on this.
__________________
1948 Chevy Aerosedan GONE! I think. 1984 Cadillac Fleetwood Brougham Coupe WANTED 1967 IMPALA 1967 CST C10 Long Bed with a 283 |
01-06-2004, 07:03 PM | #5 |
Wiseass secured himself a BAN
Join Date: Nov 2000
Location: MOON!!!
Posts: 2,282
|
Yep they just twist off. I unstitched mine to replace the fiber board and the rod is 2 peices. One peice of the rod the the part the keeps it from falling and kind of clips on to the roof. The other peice is the rod that has the elbow attached to it. Mine were all gummed up. I guess GM put some kind of wax up in there to keep it lubed and mine went bad.
|
01-06-2004, 11:33 PM | #6 |
Navel Inspector
Join Date: Mar 2003
Location: Wichita, Ks
Posts: 1,373
|
Same with mine. Hard to get off.
__________________
1948 Chevy Aerosedan GONE! I think. 1984 Cadillac Fleetwood Brougham Coupe WANTED 1967 IMPALA 1967 CST C10 Long Bed with a 283 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|