Nardi steering wheel on 65 gmc?

[Rat65]

Anyone know what kind of hub i could use?
Any suggestions? Thanks !!

[slepysal]

not trying to be a wise guy , but ...... A nardi hub ?

[padresag]

you could have one made. here is a link to one that was made for the wheel. I made a dash for a Morgan that was put on a 2002 Honda S2 chassis and running gear. the horn cap even had the Morgan insignia put on it
http://www.sawmillcreek.org/showthre...r-dash-project
ron

[zplightning]

I dig it! I put a Grant steering wheel in my truck with a quick release (I liked the Nardi style but this was more in my price range), so I had to screw around with a ton of different adapters and such. Here's a link to some pics:

http://67-72chevytrucks.com/vboard/s...d.php?t=637309

I started with a Grant 3-hole hub (which should be really easy to find for a C10) that goes on the spline.

From there you can get a 3-hole to 6-hole adapter depending on how many MM apart the holes on the steering wheel itself are. There is a company that sells adapters called Forever Sharp on eBay that I got mine from - an example here:

http://www.ebay.com/itm/0-5-Hub-for-...-/311058032839

I would measure from the column to where you want to wheel to be, to make sure it sits out far enough - and get the proper sized adapter. Mine ended up working out pretty well but did have to exchange a few parts here and there. Good luck!

[Snailed]

Originally Posted by padresag

you could have one made. here is a link to one that was made for the wheel. I made a dash for a Morgan that was put on a 2002 Honda S2 chassis and running gear. the horn cap even had the Morgan insignia put on it
http://www.sawmillcreek.org/showthre...r-dash-project
ron

Props to you and the shop building the car. Nice work

[DPowers]

http://www.thefind.com/cars/info-nar...el-hub-adapter