Couldn't pass this 66 SB GMC up

[old cool]

Hey C10, if you lower your truck, dont forget pinion angles. If you have a standard gmc, you probably have leaf springs and a dana 44 rear end with 354 gears. My pinion seal leaks and it runs about 600 bucks for bearing and seal job.
BTW, I have 8 leafs which im guessing was a heavy half ton.

[duallyjams]

[old cool]

Awesome truck James. Congratulations.

[C/10 King]

Glad it made it safe James, I hope you get many years of enjoyment!!!!

[duallyjams]

Originally Posted by C/10 King

Glad it made it safe James, I hope you get many years of enjoyment!!!!

the bucket list plan is to get it everything done that I want and bring back out to the ranch for your annual round up

[C/10 King]

Originally Posted by duallyjams

the bucket list plan is to get it everything done that I want and bring back out to the ranch for your annual round up

Well James, if you want to make it to this years round up, you better hurry because you only have 17 days and a wake up till our big bash.

[Old Truck Man]

Originally Posted by old cool

Hey C10, if you lower your truck, dont forget pinion angles. If you have a standard gmc, you probably have leaf springs and a dana 44 rear end with 354 gears. My pinion seal leaks and it runs about 600 bucks for bearing and seal job.
BTW, I have 8 leafs which im guessing was a heavy half ton.

Before you spend 600 bucks on a repair of a almost 50 year old rear end. go buy the front crossmember with the disk brakes from a 73 up and the 73 up rear end. and it will pretty much bolt in. and you can get any rear gear ratio you wish.