Need a measurement on 1960 C10 Cab

[Cruzinlow]

Does anyone know what the measurement is between the left and right kick panel along the floor of a 1960 c10 cab.
I want to replace the rockers and it looks like it was hit low on the driver side fender, just want to make sure before I start working on it.

Thank You.
V.

[austin60c10]

My 60 is at a buddies house while they do road construction on my street, if no one beats me to it ill swing over and measure this weekend.

A

[Cruzinlow]

Thanks!!!!!, I appreciate you taking the time to do that.

V.

[Ronzo]

On my 1960 C10 (Canadian built) it is 66 3/4".

[padresag]

http://www.smcars.net/threads/chevro...up-1961.32381/
there are 4 files in the middle of the page. they are for a 63 so the measures will be the same

ron

[Cruzinlow]

Originally Posted by padresag

http://www.smcars.net/threads/chevro...up-1961.32381/
there are 4 files in the middle of the page. they are for a 63 so the measures will be the same

ron

Thanks Ron, much appreciated. thanks for taking the time to find that info.

V.

[Cruzinlow]

Originally Posted by Ronzo

On my 1960 C10 (Canadian built) it is 66 3/4".

Thanks Ronzo, appreciate the info.

V.

[Ronzo]

Originally Posted by Cruzinlow

Thanks Ronzo, appreciate the info.V.

No problem, let me know what yours measures at please.

[Cruzinlow]

Originally Posted by Ronzo

On my 1960 C10 (Canadian built) it is 66 3/4".

Thanks Ronzo

Originally Posted by Ronzo

No problem, let me know what yours measures at please.

I measured mine and it's the same 66 3/4". I have a high hump, so I took my measurement from left to right level with the top of the hump.

Thanks again Ronzo.
V.