Buried to Bagged 1972 2wd - Page 15 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

olrosa · 11-01-2018, 12:02 PM

Nice, nice, nice

mcbassin · 11-08-2018, 08:28 AM

Very nice!

**72gmguy** · 11-28-2018, 04:48 PM

Did you figure out what to do with the cowl along the bottom of the windshield? I've been curious for a while what you decided. This thing is incredible!

Slick67 · 12-11-2018, 06:26 PM

Quote:

Originally Posted by jjzepplin

Ok then. Tic toc.

I know, right!?!?

Quote:

Originally Posted by jaros44sr

JMHO but, if you're doing a 2WD it should look like this thread

Lol, the how to thread!!

Quote:

Originally Posted by olrosa

Nice, nice, nice

Thank you Sir!

Quote:

Originally Posted by mcbassin

Very nice!

Thanks Brotha!

Quote:

Originally Posted by 72gmguy

Did you figure out what to do with the cowl along the bottom of the windshield? I've been curious for a while what you decided. This thing is incredible!

Yes sir I did. I'll get some pics up for ya a little later tonight or tomorrow. It was pretty simple once I figured it out. Happy to share!!

Slick67 · 12-11-2018, 07:03 PM

Roadster cowl customization in 5 easy steps!!!

I really hope this helps someone out!

Mark where your cowl should be cut to match the A-pillar.
Name: 20181025_113009_resized.jpg
Views: 995
Size: 35.0 KB

First the back portion of the cowl was cut off and relief cuts where made from the back toward the front. I took out about 1.25" at the rear and none across the center of the cowl. I cut out excess metal until both pieces butted together nicely. This gives you a flatter surface than stock.
Name: 20181025_170341_resized.jpg
Views: 1088
Size: 35.2 KB

Name: 20181025_170341_resized.jpg
Views: 1088
Size: 35.2 KB

I cut out the fresh air vents on the cowl and replaced it with 18 gauge metal. I made the metal concave to match the cowl then used a shrinker/stretcher to get it to bend properly to match the compound curve from side to side.
Name: 20181102_185100_resized.jpg
Views: 1072
Size: 50.6 KB

Name: 20181102_185100_resized.jpg
Views: 1072
Size: 50.6 KB

I worked a little short hair fiberglass into the cuts then went over that with some trusty bondo to get it to look halfway decent.
Name: 20181105_003247_resized.jpg
Views: 1040
Size: 52.2 KB

Name: 20181105_003247_resized.jpg
Views: 1040
Size: 52.2 KB

After a small amount of sanding I got it very close but still feel a small dip where the inside relief cut was made. A little more pookie on it, and it should be good! For the record, I'm not a bodyman!!

Name: IMG_20181107_175935_553_resized.jpg
Views: 1129
Size: 30.1 KB

**lks dcvn** · 12-11-2018, 09:50 PM

That's pretty nice work for a non-body man. Looks awesome!

jjzepplin · 12-12-2018, 12:32 AM

Oh now that's funny- For the record.

Slick67 · 01-17-2019, 05:07 PM

Quote:

Originally Posted by lks dcvn

That's pretty nice work for a non-body man. Looks awesome!

I gave it a shot!!!

Quote:

Originally Posted by jjzepplin

Oh now that's funny- For the record.

Definitely not a body man!! But I'll try anything once!!

Slick67 · 01-23-2019, 05:29 PM

Excuse all the junk in the background. Just wanted to post a picture showing the shaved cowl. It makes the whole truck look different.
Name: 20190106_165017_resized_1.jpg
Views: 941
Size: 57.0 KB

Name: 20190106_165017_resized_1.jpg
Views: 941
Size: 57.0 KB

I have been working to get the dash, door, fender, body and custom sail panel on the door aligned. This is turning into a hassle but it will be worth it in the end.

Name: 20190106_165123_resized.jpg
Views: 917
Size: 61.7 KB

Chulisohombre · 01-23-2019, 09:02 PM

Looks awesome. All the lines are coming together nicely.

Slick67 · 09-17-2019, 10:18 AM

Quote:

Originally Posted by Chulisohombre

Looks awesome. All the lines are coming together nicely.

Thank you sir!!

slick copper · 10-28-2019, 11:44 PM

You sound like me getting back into mine again! Trying to sell my ATV for funds to get ole Copper back on the road. Good to see you still goin on it!

Slick67 · 11-01-2019, 11:54 AM

Quote:

Originally Posted by slick copper

You sound like me getting back into mine again! Trying to sell my ATV for funds to get ole Copper back on the road. Good to see you still goin on it!

Hey brotha!! Been a minute!! Thanks for stopping by the thread.

Way too much "life" has happened over the past couple of years that has effected my progress. But I think I see some light at the end of the tunnel. It may help me keep my sanity! Glad to see you are still on yours too!

slick copper · 11-03-2019, 06:48 PM

Same Here! Been crazy last few years. But time to get it back on the road!

**raggedjim** · 05-08-2020, 11:44 AM

Nice work on those panels.

Rg

Slick67 · 07-07-2020, 07:49 PM

Quote:

Originally Posted by raggedjim

Nice work on those panels.

Rg

Thank you sir!

Slick67 · 07-07-2020, 07:55 PM

Well, it happened again. Another project acquired to fix up and help fund this project. This time a F*rd. At least it's a cool F*rd. The 55 Bird.

Name: 101888000_10223290078428925_1494716643961595490_n.jpg
Views: 1206
Size: 22.2 KB

Name: 104104004_10223322548600659_3646306487184407691_n.jpg
Views: 1182
Size: 72.9 KB

Name: 82908625_10223399754530759_1537737490252874639_n.jpg
Views: 1145
Size: 72.3 KB

jjzepplin · 07-07-2020, 08:02 PM

That's already a very nice car. I can't wait to see what you do to it. Plans?

Slick67 · 07-07-2020, 08:10 PM

Quote:

Originally Posted by jjzepplin

That's already a very nice car. I can't wait to see what you do to it. Plans?

Complete braking system, new gas tank, new fuel lines and a few small odds and ends. Maybe a little paint correction. But yes it is in really great shape and you would not believe what I gave for it.

jjzepplin · 07-07-2020, 08:35 PM

I probably wouldn't. That should bring you enough to get that ol project out and do some fancy work!

Slick67 · 08-06-2020, 10:38 AM

Quote:

Originally Posted by jjzepplin

I probably wouldn't. That should bring you enough to get that ol project out and do some fancy work!

I sure hope so! The market is down on Baby Birds right now unfortunately. Still should net me a healthy profit! Hoping for around a 17k profit!

Slick67 · 05-11-2021, 12:59 PM

Finally getting to the Blazer again! She has sat long enough and needs some major love.

Name: 20210407_190034.jpg
Views: 983
Size: 46.6 KB

Slick67 · 12-03-2021, 12:06 PM

Mayballine has been sold and the new owner looks so happy! I'll miss her but the Blazer is getting attention now.

Name: 247919728_10227330682681506_8431236712487428306_n.jpg
Views: 720
Size: 60.2 KB

C10Squared · 12-05-2021, 07:41 PM

Woot! Excited to see some progress!

**kev2809** · 12-05-2021, 08:18 PM

blazer is looking great david!

11-01-2018, 12:02 PM	#1
olrosa Registered User Join Date: Jul 2012 Location: Longview WA Posts: 748	Re: Buried to Bagged 1972 2wd Nice, nice, nice __________________ Seth Instagram: sethrosa11 My Build Thread: "Betty" http://67-72chevytrucks.com/vboard/s...d.php?t=613225 1966 C10 Patina: http://67-72chevytrucks.com/vboard/s...d.php?t=716802 1978 Big 10 http://67-72chevytrucks.com/vboard/s...d.php?t=771383

11-08-2018, 08:28 AM	#2
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Buried to Bagged 1972 2wd Very nice! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

11-28-2018, 04:48 PM	#3
72gmguy Senior Member Join Date: Mar 2009 Location: Brigantine NJ Posts: 822	Re: Buried to Bagged 1972 2wd Did you figure out what to do with the cowl along the bottom of the windshield? I've been curious for a while what you decided. This thing is incredible! __________________ Jeremy 1969 Blazer 4x4 original cst 1971 Blazer partial 2wd convert 1972 Blazer 4x4 original cst 1970 Blazer 4x4 w/ 2 1/2in lift and 33in tires w/4 wheel camper 1970 4x4 suburban w/ 6in lift and 35in tires 1968 Corvette convertible 1970 Malibu convertible 1959 Brookwood wagon 1972 International Scout ii Last edited by 72gmguy; 11-28-2018 at 04:49 PM. Reason: Punctuation

12-11-2018, 07:03 PM	#5
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Buried to Bagged 1972 2wd Roadster cowl customization in 5 easy steps!!! I really hope this helps someone out! Mark where your cowl should be cut to match the A-pillar. First the back portion of the cowl was cut off and relief cuts where made from the back toward the front. I took out about 1.25" at the rear and none across the center of the cowl. I cut out excess metal until both pieces butted together nicely. This gives you a flatter surface than stock. I cut out the fresh air vents on the cowl and replaced it with 18 gauge metal. I made the metal concave to match the cowl then used a shrinker/stretcher to get it to bend properly to match the compound curve from side to side. I worked a little short hair fiberglass into the cuts then went over that with some trusty bondo to get it to look halfway decent. After a small amount of sanding I got it very close but still feel a small dip where the inside relief cut was made. A little more pookie on it, and it should be good! For the record, I'm not a bodyman!! __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

12-11-2018, 09:50 PM	#6
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,352	Re: Buried to Bagged 1972 2wd That's pretty nice work for a non-body man. Looks awesome!

12-12-2018, 12:32 AM	#7
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,595	Re: Buried to Bagged 1972 2wd Oh now that's funny- For the record. __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

01-23-2019, 05:29 PM	#9
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Buried to Bagged 1972 2wd Excuse all the junk in the background. Just wanted to post a picture showing the shaved cowl. It makes the whole truck look different. I have been working to get the dash, door, fender, body and custom sail panel on the door aligned. This is turning into a hassle but it will be worth it in the end. __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

01-23-2019, 09:02 PM	#10
Chulisohombre Registered User Join Date: Sep 2013 Location: Bangor pa Posts: 1,223	Re: Buried to Bagged 1972 2wd Looks awesome. All the lines are coming together nicely. __________________ 72 3/4 ton blazer. 5 inch lift on 35 inch tires. 355 corvette engine with crane roller rockers, rv cam, edelbrock carb and intake with one inch spacer. Thrush Headers with flowmaster 40 duels. 4speed sm465 manual. 4 wheel disk brakes with Inboarded rear shock prerunner style mounts and shocks.

10-28-2019, 11:44 PM	#12
slick copper Registered User Join Date: Aug 2010 Location: Richmond, KY Posts: 1,137	Re: Buried to Bagged 1972 2wd You sound like me getting back into mine again! Trying to sell my ATV for funds to get ole Copper back on the road. Good to see you still goin on it! __________________ Raymond 1967 Chevy C/10 LWB Custom Optioned "big window truck" AKA Copper. My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=452594 The story of how I got the truck:http://67-72chevytrucks.com/vboard/s...d.php?t=450939 Ole Smokey Build Thread 2002 Silverado 8.1L Crew Cab SOLDhttp://67-72chevytrucks.com/vboard/s...d.php?t=618402

11-03-2019, 06:48 PM	#14
slick copper Registered User Join Date: Aug 2010 Location: Richmond, KY Posts: 1,137	Re: Buried to Bagged 1972 2wd Same Here! Been crazy last few years. But time to get it back on the road! __________________ Raymond 1967 Chevy C/10 LWB Custom Optioned "big window truck" AKA Copper. My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=452594 The story of how I got the truck:http://67-72chevytrucks.com/vboard/s...d.php?t=450939 Ole Smokey Build Thread 2002 Silverado 8.1L Crew Cab SOLDhttp://67-72chevytrucks.com/vboard/s...d.php?t=618402

05-08-2020, 11:44 AM	#15
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,652	Re: Buried to Bagged 1972 2wd Nice work on those panels. Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer - https://67-72chevytrucks.com/vboard/...d.php?t=856475 '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 Ideas - https://67-72chevytrucks.com/vboard/...d.php?t=851743

07-07-2020, 07:55 PM	#17
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Buried to Bagged 1972 2wd Well, it happened again. Another project acquired to fix up and help fund this project. This time a Frd. At least it's a cool Frd. The 55 Bird. __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

07-07-2020, 08:02 PM	#18
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,595	Re: Buried to Bagged 1972 2wd That's already a very nice car. I can't wait to see what you do to it. Plans? __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

07-07-2020, 08:35 PM	#20
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,595	Re: Buried to Bagged 1972 2wd I probably wouldn't. That should bring you enough to get that ol project out and do some fancy work! __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

05-11-2021, 12:59 PM	#22
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Buried to Bagged 1972 2wd Finally getting to the Blazer again! She has sat long enough and needs some major love. __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"



Register or Log In To remove these advertisements.

12-03-2021, 12:06 PM	#23
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Buried to Bagged 1972 2wd Mayballine has been sold and the new owner looks so happy! I'll miss her but the Blazer is getting attention now. __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

12-05-2021, 07:41 PM	#24
C10Squared Registered User Join Date: Sep 2003 Location: W. Atlanta, GA Posts: 180	Re: Buried to Bagged 1972 2wd Woot! Excited to see some progress! __________________ '72 Chevy Custom/10 Shortbed '77 2wd K5 “Halfbaked” '93 Indy pace truck ‘70 GMC Jimmy ‘76 K5 Blazer Follow me on instagram @C10squared

12-05-2021, 08:18 PM	#25
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,193	Re: Buried to Bagged 1972 2wd blazer is looking great david! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.