Canada Bowtie, Trans tunnel, shifter kit

[audaciousduo]

Doing some more garage cleaning and have no need for the following three items. I'm located in Canada but will be heading to Eureka Montana in a week to pick up some items and can ship from that location if you are not in a rush. It's much cheaper than using Canada Post but if your in a rush I'll ship that way.

1) OE blue Bowtie emblem off a 1971 Blazer. It's a nice driver quality piece. I'm looking for $25 plus shipping. SOLD

2) High hump standard transmission tunnel $25 plus shipping. Wrong Year

3) New SM465 shifter rebuild kit to get rid of that annoying rattle $12 plus shipping PM Sent

[BigCarl]

Interested in trans hump to Thunder Bay, Ontario. P7E 4H3. Please

[29od1]

What year truck is that trans tunnel from? It's not 67-72.

[audaciousduo]

It came off the same truck my windshield frame came off a 71 blazer. Now that you mention it, it looks different at the back than the cover on my Jimmy. The back is open where mine is a full bubble and closed off. Can someone clarify if there is a a difference in the floors on the trucks as my truck started out as an auto and I have converted it to a standard.

Originally Posted by 29od1

What year truck is that trans tunnel from? It's not 67-72.

[BigCarl]

Can we confirm the trans hump is from a 67-72 blazer? If it is, I will take it.

[audaciousduo]

From the research I've done online I'm going to say no, it looks post 1972. I don't want to sell you something you are unhappy with or get stuck with like I apparently did. Are you converting to a standard? If so I just cut the extra shifter hole in the hump that was on the automatic truck and it worked fine. I was under the impression the floors were different but it appears they are not. I have a high hump cover on my parts truck if you are stuck but it is an automatic and will need the hole cut. Sorry for the confusion.

Originally Posted by BigCarl

Can we confirm the trans hump is from a 67-72 blazer? If it is, I will take it.

[72chevynut]

I'm interested in the sm465 shifter rebuild kit, how much shipped to 40353

[BigCarl]

Originally Posted by audaciousduo

From the research I've done online I'm going to say no, it looks post 1972. I don't want to sell you something you are unhappy with or get stuck with like I apparently did. Are you converting to a standard? If so I just cut the extra shifter hole in the hump that was on the automatic truck and it worked fine. I was under the impression the floors were different but it appears they are not. I have a high hump cover on my parts truck if you are stuck but it is an automatic and will need the hole cut. Sorry for the confusion.

Ok. Thank you. I was just looking at other transmission tunnels and they go up the firewall as the one you have pictured is straight cut. Thank you very much.

[audaciousduo]

I can give you a Canada Post quote right away but shipping from the Peoples Republic of Canada is expensive. If you want it I'm going to Eureka next week and will ship it from there which should be cheap. I cant get you a quote because it's an hour and a half drive. Let me know your wishes.

Thanks

Originally Posted by 72chevynut

I'm interested in the sm465 shifter rebuild kit, how much shipped to 40353

[72chevynut]

I'm not in no rush, you can let me know once in US. Shouldn't be much here, just pm payment info and we can go from there. Thanks

[skidder111]

Are the door patch panels from your other thread still available? I'm about an hour away and could come pick them up. Thanks.

[audaciousduo]

Still Have them ..... sent you a PM