|
05-13-2015, 02:44 PM
|
#1 |
|
Registered User
 Join Date: Aug 2013
Location: Las Vegas, nevada
Posts: 32
|
blazer fuel lines
i have a 72 blazer 2 wheel drive that had a 6 cyl in it. am going with a 350 now . i bought a new gas tank and sending unit. the problem is all the fuel lines to the motor are 5/16 and the out let for the sending unit is 3/8 ? would that be because the sending unit is for a v8 and the lines are for a 6 cyl ? also when i put on new lines do i need to have the double loop at mid frame that has hose on it? one more dum ass question. cant i just simplify the whole system and not have all the plumbing that goes up to the round tube at the back of the bed? thanks to all for any help.
|
|
|
|
05-15-2015, 12:59 PM
|
#2 |
|
Registered User
Join Date: Aug 2014
Location: Bucyrus Ohio
Posts: 17
|
Re: blazer fuel lines
You are probably correct on the 6 cyl & v8 sending unit. I just put together a jimmy with a v8 and just run a simple configuration. Single line no return and have not experienced any issues. Hope this helps
|
|
|
|
|
05-15-2015, 02:08 PM
|
#3 |
|
Registered User
Join Date: Jan 2013
Location: Monrovia CA
Posts: 453
|
Re: blazer fuel lines
Same story with my '68 short fleet p/u. I also have a 2 wheel and scraped everything but the assentules. Rember to use a vented cap I think '72's are'nt. Good luck
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
