|
Re: 16" steelies for 67 k-20
Quote:
Originally Posted by special-K
I guess you have to worry about brand, because I have never heard of any GM 8-lug wheel not fitting over any GM brake drum...ever. I have some earlier Ford 16" (3) on my '72 with no problems
|
I agree with K, I put non-brand specific Alcoa's on my truck and have had no problems.
Have you modified the hub at all? You said you checked diameter and width...what about your backspace? Too much maybe? When you tighten the lugs are you trying to pull the drum into the wheel? My bet is that's what's happening hence your wobble because the lugs feel tight, but the wheel center is not right against the hub because of the drum.
__________________
'68 Short C20 Flatbed Dually
w/ 292 4bbl, Langdon cast headers,
and WC T5 trans.
'81 G10 Shorty Van
"Good judgement comes from experience, and a lot of that comes from bad judgement." Will Rogers
"Under promise, then over achieve."
|
05-27-2015, 12:55 PM
Hybrid Mode
