|
05-27-2015, 02:46 PM
|
#1 |
|
Registered User
Join Date: May 2010
Location: Hillsboro, Oregon 97123
Posts: 1,300
|
Drop spindles
Are drop spindles the same on 1/2 and 3/4 ton trucks? 1990-97
__________________
Measure with a yard stick Mark with Chalk Cut with a torch  Built it yourself, don't count on others to to do it for you or with you. It will never get done |
|
|
|
05-27-2015, 02:55 PM
|
#2 |
|
Registered Loser
Join Date: Jun 2009
Location: Elyria, OH
Posts: 1,523
|
Re: Drop spindles
You may be able to use 1/2 ton drop spindles on a 3/4 ton if you swap ball joints. Not totally sure on that one though.
__________________
((..)) ((0)) '63 GMC lwb, 383, th350, lays frame, genuine patina. The Build Thread - http://67-72chevytrucks.com/vboard/s...d.php?t=374267 '88 Astro cargo bagged, shaved, phantom grille. *SOLD* '50 Chevy 2 door sedan awaiting attention. 2014 Silverado Ext cab, 5.3, daily driver. |
|
|
|
|
05-27-2015, 03:23 PM
|
#3 |
|
Never Ending Projects
Join Date: Jul 2006
Location: San Diego, CA
Posts: 3,836
|
Re: Drop spindles
It depends on if the 90-97 are light duty 3/4 ton or heavy duty 3/4 ton. The LD version uses the same spindle as the 1/2 ton but uses 6 lug rotors instead of 5 lug. The HD spindles are different and use only 8 lug rotors.
With the LD version, you can swap between 5 or 6 lug with just a factory rotor change. To use these though, you have to use a 63-87 3/4 ton lower arm to fit the later model ball joint.
__________________
. 1965 C10 Panel,  Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often... |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
