1963 Vent window pivot rivet - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jame · 07-01-2015, 10:17 PM

One of my frames has the upper pivot missing altogether. Cant seem to find this rivet for sale by itself or in a kit. It is different than the 64-66 style. THanks

pimpston65 · 07-01-2015, 10:44 PM

Quote:

Originally Posted by jame

One of my frames has the upper pivot missing altogether. Cant seem to find this rivet for sale by itself or in a kit. It is different than the 64-66 style. THanks

evilbay is a good source, just gotta think outside the box, use measurements instead of application...

1963c-10 · 07-02-2015, 08:37 AM

Yeah, you will have to source a used vent assembly. The pivot is not available separate that I'm aware of.

**nsb29** · 07-02-2015, 06:01 PM

try your local bolt an nut if they don't have it they can probably order it you would have to order a minimum amount we have a place hear called Fastenal I think they are national

jame · 07-02-2015, 09:03 PM

I'll keep the frames for the future. I'm going to look into the one piece conversion from Classic Truck Glass since I need to replace everything else anyway. Thanks

07-01-2015, 10:17 PM	#1
jame Registered User Join Date: Mar 2009 Location: gravois mills missouri Posts: 47	1963 Vent window pivot rivet One of my frames has the upper pivot missing altogether. Cant seem to find this rivet for sale by itself or in a kit. It is different than the 64-66 style. THanks __________________ 1963 chevy shortstep 327 1965 c60 292 2007 Ram 3500 5.9 cummins

07-02-2015, 08:37 AM	#3
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 1963 Vent window pivot rivet Yeah, you will have to source a used vent assembly. The pivot is not available separate that I'm aware of. __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer Last edited by 1963c-10; 07-02-2015 at 08:49 AM.

07-02-2015, 06:01 PM	#4
nsb29 Senior Member Join Date: Feb 2014 Location: new smyrna beach fl / 29 palms cal Posts: 1,727	Re: 1963 Vent window pivot rivet try your local bolt an nut if they don't have it they can probably order it you would have to order a minimum amount we have a place hear called Fastenal I think they are national

07-02-2015, 09:03 PM	#5
jame Registered User Join Date: Mar 2009 Location: gravois mills missouri Posts: 47	Re: 1963 Vent window pivot rivet I'll keep the frames for the future. I'm going to look into the one piece conversion from Classic Truck Glass since I need to replace everything else anyway. Thanks __________________ 1963 chevy shortstep 327 1965 c60 292 2007 Ram 3500 5.9 cummins

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.