|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-09-2015, 11:09 PM
|
#1 |
|
Registered User
Join Date: May 2015
Location: Cibolo, TX
Posts: 10
|
Squarebody trans crossmember
I am using the Pacesetter TBSS long tube headers and they run straight in to the crossmember, was wondering if anyone has used CPP CP9424 on a squarebody or any reasonably price crossmember i will be running 3" exhaust and don't want it to hang below the frame rails.
|
|
|
|
09-10-2015, 01:14 PM
|
#2 |
|
Always a work in progress
Join Date: Jun 2007
Location: Harker Heights, TX
Posts: 1,599
|
Re: Squarebody trans crossmember
Do you have pictures of the headers installed? I assume they don't hang below the frame rail? What mounts are you using?
__________________
USMC Retired Never trust a man who can't laugh at his own fart! 2010 Silverado Crew Cab 73 SWB 5.3/4l80e Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=695168 |
|
|
|
|
09-16-2015, 09:02 PM
|
#3 |
|
Registered User
Join Date: May 2015
Location: Cibolo, TX
Posts: 10
|
Re: Squarebody trans crossmember
They hug the frame rail perfectly.
|
|
|
|
|
09-17-2015, 05:42 AM
|
#4 |
|
Collector of Projects
Join Date: Apr 2003
Location: Las Vegas
Posts: 3,106
|
Re: Squarebody trans crossmember
Why not modify the cross member with a piece of heavy wall round tube that would allow the exhaust to pass through.
|
|
|
|
|
09-18-2015, 08:45 AM
|
#5 |
|
Registered User
Join Date: Apr 2010
Location: Guntersville Alabama
Posts: 1,073
|
Re: Squarebody trans crossmember
I used one of these universal cross members from summit . It worked good on my 82 with the 4l60 . Gave me plenty room for the exhaust to go under . I welded one end and drilled and bolted the other to give me room to remove when necessary. Pretty inexpensive and I did not have to spend a week fabing one .
http://www.summitracing.com/parts/trd-6539 |
|
|
|
|
09-18-2015, 08:55 AM
|
#6 |
|
Registered User
Join Date: Apr 2010
Location: Guntersville Alabama
Posts: 1,073
|
Re: Squarebody trans crossmember
I used one of these universal cross members from summit . It worked good on my 82 with the 4l60 . Gave me plenty room for the exhaust to go under . I welded one end and drilled and bolted the other to give me room to remove when necessary.
http://www.summitracing.com/parts/trd-6539 Heres a couple pictures |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
