The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-03-2015, 11:09 PM   #1
tommy217xxx
Registered User
 
tommy217xxx's Avatar
 
Join Date: Oct 2014
Location: mi
Posts: 359
rough ride issue

Hey everyone, I have a 76 1500 that has 2"drop spindles and 2"drop springs in the front and flip kit in the rear. I didn't install any of it, it was all on the truck when I bought it.

To me the truck is a super rough ride. I think it's in the rear but I'm not sure. Should I take a leaf out of the rear or maybe even think about doing a coil over conversion? I'm not plain on doing much hauling with her but I do want a nice ride for my 2 year old son and girlfriend.

Thanks for any advice as I have very little knowledge on trucks or suspension. Also if I should do the conversation please through ,e some suggestions on kits and combo packages.
__________________
TJ

76 gmc 1500 swb patina finish
Dropped 4/5, 350/4 speed

80 Chevy c10 lwb
305/350
tommy217xxx is offline   Reply With Quote
Old 10-03-2015, 11:46 PM   #2
andrewmp6
Registered User
 
Join Date: Jan 2009
Location: Louisville,Ky
Posts: 5,811
Re: rough ride issue

Take some pictures of the front and rear suspension for us.
andrewmp6 is offline   Reply With Quote
Old 10-04-2015, 01:07 AM   #3
tinydb84
Registered User
 
tinydb84's Avatar
 
Join Date: Jul 2009
Location: San Jose Ca
Posts: 2,871
Re: rough ride issue

How old are your shocks? Are you hitting the frame?
__________________
David
Used parts build: http://67-72chevytrucks.com/vboard/s...d.php?t=638991
My brother's Nova: http://www.67-72chevytrucks.com/vboa...d.php?t=727985
Rear suspension rework: http://www.67-72chevytrucks.com/vboa...d.php?t=750557
Instagram: myfabguy
tinydb84 is offline   Reply With Quote
Old 10-04-2015, 01:13 PM   #4
tommy217xxx
Registered User
 
tommy217xxx's Avatar
 
Join Date: Oct 2014
Location: mi
Posts: 359
Re: rough ride issue

Unsure of the age. I just bought her a few months ago. Here's the driver side rear pic
Attached Images
 
__________________
TJ

76 gmc 1500 swb patina finish
Dropped 4/5, 350/4 speed

80 Chevy c10 lwb
305/350
tommy217xxx is offline   Reply With Quote
Old 10-04-2015, 01:14 PM   #5
tommy217xxx
Registered User
 
tommy217xxx's Avatar
 
Join Date: Oct 2014
Location: mi
Posts: 359
Re: rough ride issue

Passenger side rear
Attached Images
 
__________________
TJ

76 gmc 1500 swb patina finish
Dropped 4/5, 350/4 speed

80 Chevy c10 lwb
305/350
tommy217xxx is offline   Reply With Quote
Old 10-04-2015, 01:15 PM   #6
tommy217xxx
Registered User
 
tommy217xxx's Avatar
 
Join Date: Oct 2014
Location: mi
Posts: 359
Re: rough ride issue

Passenger side front
Attached Images
 
__________________
TJ

76 gmc 1500 swb patina finish
Dropped 4/5, 350/4 speed

80 Chevy c10 lwb
305/350
tommy217xxx is offline   Reply With Quote
Old 10-04-2015, 03:49 PM   #7
tinydb84
Registered User
 
tinydb84's Avatar
 
Join Date: Jul 2009
Location: San Jose Ca
Posts: 2,871
Re: rough ride issue

I would put relocaters on the rear and new shocks all around. I can't tell from the pic but you might need a c notch and to cut down the front bump stops.
__________________
David
Used parts build: http://67-72chevytrucks.com/vboard/s...d.php?t=638991
My brother's Nova: http://www.67-72chevytrucks.com/vboa...d.php?t=727985
Rear suspension rework: http://www.67-72chevytrucks.com/vboa...d.php?t=750557
Instagram: myfabguy
tinydb84 is offline   Reply With Quote
Old 10-04-2015, 05:36 PM   #8
cdowns
Senior Member
 
cdowns's Avatar
 
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
Re: rough ride issue

looks to me that your front shocks are too ahort you need more of action to make them work right and your rear shocks look to be laid out so they have no damping at all with them layin down they need to be up and down straight for best use
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane

MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF

DONT BELIEVE EVERYTHING YOU THINK

TAKE MY ADVISE;I DON'T USE IT ANYWAY
cdowns is offline   Reply With Quote
Old 10-04-2015, 06:22 PM   #9
tommy217xxx
Registered User
 
tommy217xxx's Avatar
 
Join Date: Oct 2014
Location: mi
Posts: 359
Re: rough ride issue

Ok. It is notched already. It sounds like I need to relocate the rears and replace them all. Any recommendations on relocation kits and shocks? I saw some $150 kits and $60 kits. Is there a difference? I want to get good stuff but I don't want to pay for a name.
__________________
TJ

76 gmc 1500 swb patina finish
Dropped 4/5, 350/4 speed

80 Chevy c10 lwb
305/350
tommy217xxx is offline   Reply With Quote
Old 10-05-2015, 03:46 AM   #10
Slow Build
Registered User
 
Slow Build's Avatar
 
Join Date: Sep 2009
Location: California Delta
Posts: 2,163
Re: rough ride issue

When I installed a flip kit (36 years ago) it came with shock extenders that extended the shock about 3" and also slightly decreased the angle of the shock. Something like these would be cheap I would think. The picture is from that 1979 install.
Attached Images
 
__________________
Name: Rich
Current Ride: 1964 C-10 Short Fleetside
Daily Driver: 2005 GMC crew cab short fleetside /2001 Chevy Tahoe
Past GM Trucks:
1959 GMC short stepside
1968 GMC short stepside-4x4
1973 Chevy short stepside
1989 Chevy short fleetside-reg cab
1993 Chevy short fleetside-Xcab
2002 Chevy short fleetside-Xcab

Save the dinosaurs, use synthetic oil.
Slow Build is offline   Reply With Quote
Old 10-05-2015, 06:11 PM   #11
tommy217xxx
Registered User
 
tommy217xxx's Avatar
 
Join Date: Oct 2014
Location: mi
Posts: 359
Re: rough ride issue

Does it look like it has the right number of leafs in the truck for a 1/2 ton. I ask b/c my dad thinks it has 1ton suspension on it.
__________________
TJ

76 gmc 1500 swb patina finish
Dropped 4/5, 350/4 speed

80 Chevy c10 lwb
305/350
tommy217xxx is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:23 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com