10-13-2015, 04:57 PM | #1 |
Registered User
Join Date: Nov 2012
Location: Fountain, CO
Posts: 40
|
1959 GMC 100 Brakes?
OK so this is the deal I am still trying to just get this thing to run drive and stop. The first one is good second tbd, as the third is not there yet. I am going to keep brakes stock as its quickest and easy way to do it also $ come in to play big time on anything I do. I am a disabled vet was retired by army at 29yr. old for a fun time. Anyway I rebuilt my master cylinder and was about ready it install when I realized I was missing parts, master wasn't on when I got the gmc. I don't have the shafts part #3719611 that holds the lower part of brake pedal in place on the brake master. Also missing is the retainer part #3712797 I am missing all the nuts and bolts but that I can deal with. Dose anyone have the parts from an upgrade they did or know if anyone makes them? Or any ideas on what I can do to make this work? I am so close to driving this pickup down the road! If I don't get it done soon it's going to have to sit outside over another Colorado winter cause I can't do the cold well!
Thanks for any help in advance! |
10-13-2015, 06:09 PM | #2 |
Registered User
Join Date: Nov 2012
Location: Fountain, CO
Posts: 40
|
Re: 1959 GMC 100 Brakes?
Side note I have all the bolts but stir need the two other parts. Just need to get a few new washers... getting closer!
|
10-13-2015, 07:44 PM | #3 |
Registered User
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
|
Re: 1959 GMC 100 Brakes?
Maybe someone who converted to after market under cab set up can help, I used the stock stuff on mine. The shaft is a pretty precision press fit with the drilled center for greasing and notchs for the horseshoe retainer plate. One you had the shaft you could figure out the retainer.
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project |
10-13-2015, 09:46 PM | #4 |
Hollister Road Co.
Join Date: Apr 2005
Location: Houston
Posts: 6,131
|
Re: 1959 GMC 100 Brakes?
email me info@thoroco.com I should have this
|
10-17-2015, 02:02 AM | #5 |
Registered User
Join Date: Feb 2009
Location: Glendale, Az
Posts: 1,062
|
Re: 1959 GMC 100 Brakes?
if things don't work out, PM me. I have a complete master I send you for the price of shipping.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|