The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-10-2015, 03:10 AM   #1
slotard
Registered User
 
Join Date: Nov 2014
Location: Alameda, CA
Posts: 877
Softening up C20 Camper Special

I have a '73 C20 Camper Special. It has a utility bed that isn't light and is typically full of tools, but I don't tend to haul much. It weighed in at 5300 on the dump scales, I think that was after I subtracted my weight, 350/350/14FF.

I just don't haul enough with it to need the springs that I have, and would like better ride quality as it's atrocious compared to modern 3/4s I've ridden in. Mostly the rear, but the front isn't good either. I don't mind if it ends up a little lower. How many of the leaves should I pull, any suggestions? I'd like to occasionally use it as a truck but realistically it isn't at all often that I put more than half a ton in the bed, I don't tow much either, I bought it rather than a C10 because I found the right deal on it. Will C10 springs bolt up for the front?

I could also use suggestions on shocks, I'm not sure the ones I have aren't original.

Thanks for any help.
__________________
1973 C20, 350/350
slotard is offline   Reply With Quote
Old 12-10-2015, 03:21 AM   #2
andrewmp6
Registered User
 
Join Date: Jan 2009
Location: Louisville,Ky
Posts: 5,811
Re: Softening up C20 Camper Special

Yeah the front you can use c10 springs,The rear you could take the spring packs apart and take out one leaf.
andrewmp6 is offline   Reply With Quote
Old 12-16-2015, 03:18 PM   #3
slotard
Registered User
 
Join Date: Nov 2014
Location: Alameda, CA
Posts: 877
Re: Softening up C20 Camper Special

Only one? It's 8 leaves I think, 8200? GVWR - I think the heaviest single cab C20 they made at the time.

Any suggestions on shocks?

Are there different types of C10 front springs I should consider?
__________________
1973 C20, 350/350
slotard is offline   Reply With Quote
Old 12-17-2015, 01:34 AM   #4
tinydb84
Registered User
 
tinydb84's Avatar
 
Join Date: Jul 2009
Location: San Jose Ca
Posts: 2,871
Re: Softening up C20 Camper Special

I pulled 3 or 4 from my C20. You can see the process in my building thread. Made an amazing difference. I didnt drive it much like that before I tore it apart though.

If you want a soft ride you can order new Springs for the front. I got the softest ones I could find. I wanna say 67-72 small block but you can check.
__________________
David
Used parts build: http://67-72chevytrucks.com/vboard/s...d.php?t=638991
My brother's Nova: http://www.67-72chevytrucks.com/vboa...d.php?t=727985
Rear suspension rework: http://www.67-72chevytrucks.com/vboa...d.php?t=750557
Instagram: myfabguy
tinydb84 is offline   Reply With Quote
Old 12-18-2015, 12:55 PM   #5
slotard
Registered User
 
Join Date: Nov 2014
Location: Alameda, CA
Posts: 877
Re: Softening up C20 Camper Special

I was assuming I needed coils from the same gem truck as mine. I don't need car ride quality, I'd just like to not feel like I'll break my back if I hit a pothole.
__________________
1973 C20, 350/350
slotard is offline   Reply With Quote
Old 12-18-2015, 01:03 PM   #6
tinydb84
Registered User
 
tinydb84's Avatar
 
Join Date: Jul 2009
Location: San Jose Ca
Posts: 2,871
Re: Softening up C20 Camper Special

The springs should interchange without a problem. The ones I bought were Moog 6452. You can get them on Amazon for $70 with free shipping if you have prime. I never used mine and probably still have them I can check, if you want to make the drive I'll give them to you for free.
__________________
David
Used parts build: http://67-72chevytrucks.com/vboard/s...d.php?t=638991
My brother's Nova: http://www.67-72chevytrucks.com/vboa...d.php?t=727985
Rear suspension rework: http://www.67-72chevytrucks.com/vboa...d.php?t=750557
Instagram: myfabguy
tinydb84 is offline   Reply With Quote
Old 12-18-2015, 04:49 PM   #7
slotard
Registered User
 
Join Date: Nov 2014
Location: Alameda, CA
Posts: 877
Re: Softening up C20 Camper Special

Thanks for the offer, I might have to take you up on that (I'm in Santa Clara fairly often). Those seem to be used on a ton of different trucks, everything from a C10 with an I6 to a C30 with a bigblock, I'm surprised.
__________________
1973 C20, 350/350
slotard is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:02 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com