Temperature gauge question

[ConradBSomething]

What are you guys using for your stock gauge sending units?


Thanks in advance.

[MikeN]

These guys can hook you up...

https://www.lectriclimited.com/

The stock temp gauge in neither my 69 Chevelle nor my 64 C10 worked correctly until I got the proper sending units from Lectric Limited. Now they both work perfectly. A tad pricey, but worth it.

[ConradBSomething]

Thanks man!

[jwebb]

Originally Posted by MikeN

These guys can hook you up...

https://www.lectriclimited.com/

The stock temp gauge in neither my 69 Chevelle nor my 64 C10 worked correctly until I got the proper sending units from Lectric Limited. Now they both work perfectly. A tad pricey, but worth it.

Mike, Im not able to find the sending unit -- only the lead wire repair kit -- for the 1965 GMC truck....any other sites/suggestions?

I didnt see it on LMC either....

[MikeN]

I think this is what you need, from Lectric Limited's catalog...

"01513321 TEMPERATURE SENDING UNIT, -original 1/2 x 14 N.P.T.F.-, with factory gauges (correct resistance and connection, produces accurate gauge display)"

I went to this section of their catalog...

"1965 GM CHEVROLET TRUCK/PICK-UP/SUBURBAN/BLAZER"

I believe if you call them they will verify that 01513321 is the correct temp sender for a 65 GMC with factory gauges.

[ConradBSomething]

I called and that's the one!
Thanks again Mike.

[LostMy65]

Saved for reference