Stepside fenders with tail lights - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rsmarr1982 · 03-13-2016, 01:27 PM

I have a set of stepside fenders that have a indent and holes to have tail lights bolted on but all the lights I see are for the ones that bolt to a bracket at the rear of the bed. The holes appear to be factory . Any ideas?

**Classic v6 GMC's** · 03-13-2016, 01:31 PM

Quote:

Originally Posted by rsmarr1982

I have a set of stepside fenders that have a indent and holes to have tail lights bolted on but all the lights I see are for the ones that bolt to a bracket at the rear of the bed. The holes appear to be factory . Any ideas?

I think you are talking about the indent for back up lights on 1966 trucks.

rsmarr1982 · 03-13-2016, 01:45 PM

They might be it. If I buy the lights listed at lmc for 60-66 and just not use the Brackett should they bolt on the fendèr?

BR3W CITY · 03-13-2016, 02:21 PM

The holes are for the reverse lights. The tail lights still bolt to the cups/brackets on the tail.

I punched my old reverse spots out, and frenched the old light cup into its spot, so my tail lights do actually sit there.

03-13-2016, 01:27 PM	#1
rsmarr1982 Registered User Join Date: Jul 2010 Location: mogadore ohio Posts: 867	Stepside fenders with tail lights I have a set of stepside fenders that have a indent and holes to have tail lights bolted on but all the lights I see are for the ones that bolt to a bracket at the rear of the bed. The holes appear to be factory . Any ideas? __________________ 1969 chevy c10 lwb stepside 250 6 3 ott 1971 chevy c10 lwb 250 6 with power steering 3 ott 1972 chevy k20 4x4 350/TH350 automatic 1978 chevy Malibu 4dr 305 2bbl (all original) 1979 chevy k10 Scottsdale 350/th350 full-time 4wd(daily driver)

03-13-2016, 01:45 PM	#3
rsmarr1982 Registered User Join Date: Jul 2010 Location: mogadore ohio Posts: 867	Re: Stepside fenders with tail lights They might be it. If I buy the lights listed at lmc for 60-66 and just not use the Brackett should they bolt on the fendèr? Attached Images __________________ 1969 chevy c10 lwb stepside 250 6 3 ott 1971 chevy c10 lwb 250 6 with power steering 3 ott 1972 chevy k20 4x4 350/TH350 automatic 1978 chevy Malibu 4dr 305 2bbl (all original) 1979 chevy k10 Scottsdale 350/th350 full-time 4wd(daily driver)

03-13-2016, 02:21 PM	#4
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Stepside fenders with tail lights The holes are for the reverse lights. The tail lights still bolt to the cups/brackets on the tail. I punched my old reverse spots out, and frenched the old light cup into its spot, so my tail lights do actually sit there. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.