|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-04-2016, 11:33 PM
|
#1 |
|
Registered User
Join Date: Aug 2005
Location: NOR CAL
Posts: 79
|
Stock brake booster support ?
While adjusting my brake pedal rod to the power b. linkage and new booster. I notice the master cylinder moving about 1/2 " to the side when pushing on the pedal.
I saw this through the windshield with the hood up. The flex is coming from the firewall. I'm also running a master cyl. from a '71 chevy for its disc-drums app. My ?, Is that normal or Is there a support bracket I'm missing. Thanks , D. |
|
|
|
04-05-2016, 01:03 AM
|
#2 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: Stock brake booster support ?
If you are using a brake booster that is attached other than thru the original bolt holes, that will explain the movement. Your booster is not securely attached to the pedal assembly bracket.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
