Hydraulic clutch help

[vintagezx]

Originally Posted by Heater63

IIRC, the Novak Adapter website had a lot of tech info on measuring/matching, check there too. I wanted a solid TO Bearing, and once mounted, an external slave is not really visible, so thats what I used: Novak kit with a Wilwood .75 master

https://www.novak-adapt.com/catalog/clutch/kit-hcr3/ The only thing left is to have a hydraulic line made with correct fittings on each end. A hose shop made mine in about 15 minutes for $50. Do not buy the line Novak sells, it is made to fit a Jeep Master, will not fit the Wilwood as there in not enough room to install adapters.

Thanks for the info. I like the look of the Novak kit. I keep thinking about having to pull the transmission if I had a leak or was just wondering so outside sounds better than inside.