|
|
|
07-04-2016, 02:15 PM
|
#1 |
|
Registered User
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,731
|
Re: 235 pressure plate
It always astounds me that guys will order hard parts from specialty houses rather than pull the part out and take it to a local parts house and match it up.
One thing on parts like clutches and flywheels unless you are positive that nothing has been changed from original you often don't know what someone swapped around in the past and it may have a different flywheel and clutch setup in it than it came with stock. Oreillys is showing a 10 inch clutch setup for a 57 3600 truck with a 235. http://www.oreillyauto.com/site/c/de...1351&ppt=C0015 Is your disk 10 inch or smaller or larger? The other thing, did you get the part number you ordered? They may have shipped the wrong clutch.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
