Need some shocks for a dropped truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Moneymatt448 · 08-26-2016, 09:37 PM

I need help finding shocks for my lowered 69 any one know of some good places I don't know what size I need but if some one can explain how to get the sizes I can find out what I need
Posted via Mobile Device

**kwmech** · 08-27-2016, 01:40 AM

I would talk to whoever sold you the drop kit and see what they have available. Other option is to take measurements from center to center then get a book at the auto parts store. Another option is to move the mounts to get the center to center you need to match the shock that is available

ryanv70c10 · 08-27-2016, 02:55 AM

If you did dropped front spindles, then stock length shocks will work in the front. Rear you need to measure like already mentioned.

Moneymatt448 · 09-01-2016, 09:11 PM

Like center to center of the mounting holes ?
Posted via Mobile Device

Jhawk73 · 09-02-2016, 12:24 PM

I just installed CPP shocks for dropped applications. So far they ride great. My truck is lowered 4.5/6. Front part # Cpp-m1200gll Rear Cpp-4052g

Ekliptix · 09-02-2016, 03:17 PM

Search for a thread 'proper dampening ECE....". It's a discussion about decent shocks for lowered trucks. The consensus is that KYB shocks suck. CPP gas shocks are better, sizes for different amounts of lowering on on the CPP site, $40 each. Ridetech shocks are the best, $140 each. I ordered some CPPs to replace my KYBs that came with the ECE lowering kit.

RustyBucket · 09-02-2016, 03:44 PM

Quote:

Originally Posted by Jhawk73

I just installed CPP shocks for dropped applications. So far they ride great. My truck is lowered 4.5/6. Front part # Cpp-m1200gll Rear Cpp-4052g

I have CPP 4" drop springs & a 1" block on the rear of my GMC, adj. track bar & shock relocator kit. I installed this stuff a couple of years ago with CPP's shocks and I don't think they lasted very well. It's bouncy and I need to figure the correct Monroe, Gabriel or other name-brand shock to replace 'em. I have Monroe's on the front with a 2.5" drop and a 1" spring and the front has way better bounce damping than the rear.

Ekliptix · 09-02-2016, 06:07 PM

In the thread I mentioned above, the owner/employee of ECE personally uses these shocks on his truck: http://www.classicperform.com/Store/RIDETECH-SHOCK.htm

08-26-2016, 09:37 PM	#1
Moneymatt448 Registered User Join Date: Aug 2016 Location: San Antonio Texas Posts: 10	Need some shocks for a dropped truck I need help finding shocks for my lowered 69 any one know of some good places I don't know what size I need but if some one can explain how to get the sizes I can find out what I need Posted via Mobile Device

08-27-2016, 01:40 AM	#2
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,637	Re: Need some shocks for a dropped truck I would talk to whoever sold you the drop kit and see what they have available. Other option is to take measurements from center to center then get a book at the auto parts store. Another option is to move the mounts to get the center to center you need to match the shock that is available

08-27-2016, 02:55 AM	#3
ryanv70c10 Registered User Join Date: Feb 2016 Location: San Mateo Posts: 199	Re: Need some shocks for a dropped truck If you did dropped front spindles, then stock length shocks will work in the front. Rear you need to measure like already mentioned.

09-01-2016, 09:11 PM	#4
Moneymatt448 Registered User Join Date: Aug 2016 Location: San Antonio Texas Posts: 10	Re: Need some shocks for a dropped truck Like center to center of the mounting holes ? Posted via Mobile Device

09-02-2016, 12:24 PM	#5
Jhawk73 Registered User Join Date: Aug 2015 Location: Stokesdale nc Posts: 19	Re: Need some shocks for a dropped truck I just installed CPP shocks for dropped applications. So far they ride great. My truck is lowered 4.5/6. Front part # Cpp-m1200gll Rear Cpp-4052g

09-02-2016, 03:17 PM	#6
Ekliptix Registered User Join Date: Aug 2013 Location: Calgary, Alberta Posts: 683	Re: Need some shocks for a dropped truck Search for a thread 'proper dampening ECE....". It's a discussion about decent shocks for lowered trucks. The consensus is that KYB shocks suck. CPP gas shocks are better, sizes for different amounts of lowering on on the CPP site, $40 each. Ridetech shocks are the best, $140 each. I ordered some CPPs to replace my KYBs that came with the ECE lowering kit. __________________ 1972 Cheyenne Super SWB PS, PB, Tach, A/C, Tilt. Drivetrain: Built 402BB, TCI Streetfighter 700R4, 2,500 stall, Eaton posi, 3.73. Suspension/Chassis: ECE 4.5/6.5 drop, CPP nitrogen shocks, CPP front and rear sway bar, CPP cross members. Exhaust: 3" exhaust with x-pipe, Spintech 3000 mufflers, Hooker ceramic coated headers. Best 1/4 mile time: TBD.

09-02-2016, 06:07 PM	#8
Ekliptix Registered User Join Date: Aug 2013 Location: Calgary, Alberta Posts: 683	Re: Need some shocks for a dropped truck In the thread I mentioned above, the owner/employee of ECE personally uses these shocks on his truck: http://www.classicperform.com/Store/RIDETECH-SHOCK.htm __________________ 1972 Cheyenne Super SWB PS, PB, Tach, A/C, Tilt. Drivetrain: Built 402BB, TCI Streetfighter 700R4, 2,500 stall, Eaton posi, 3.73. Suspension/Chassis: ECE 4.5/6.5 drop, CPP nitrogen shocks, CPP front and rear sway bar, CPP cross members. Exhaust: 3" exhaust with x-pipe, Spintech 3000 mufflers, Hooker ceramic coated headers. Best 1/4 mile time: TBD.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.