Removing engine

[aussiejohn]

yo 68gmsee, that's exactly what I wanted. Thank you. I left the fenders on the truck, with the upper and lower rear bolts loosened, and spread the fronts apart just enough to remove the rad. support panel. Now I have to remove the tailshaft, four engine mounts and speedo cable and gear lever, that should be it. Oh, plus a few wires and accelerator linkage etc. Took most of Sunday afternoon, have to work today and tomorrow, but hope to have it done by the weekend.

I plan to paint the panel with POR 15, as it's covered with mild surface rust on the rear, faded black paint on the front. Might as well have it looking sanitary if I can.

Regards from Down Under.

aussiejohn