|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-13-2016, 10:37 PM
|
#1 |
|
Registered User
Join Date: Nov 2009
Location: DFW,TX
Posts: 233
|
How would you guys run a return on a squarebody truck 83 model?
My system I'm currently working on has a feed and return should I return the fuel directly back into the tank or return it behind the fuel pump on a t with the 5/16 port, again on working on a 83 model truck Chevy
|
|
|
|
09-14-2016, 04:50 AM
|
#2 |
|
Registered User
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,119
|
Re: How would you guys run a return on a squarebody truck 83 model?
Return it all the way to the tank, you cant T it in behind the pump. Easiest way is to use a sender for an 87 that is set up for fuel injection and just put in a higher pressure pump.
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html |
|
|
|
|
09-14-2016, 07:20 AM
|
#3 |
|
Senior Member
 
Join Date: Oct 2012
Location: Miami, Florida
Posts: 959
|
Re: How would you guys run a return on a squarebody truck 83 model?
hello. this is what ls1nova71 is referring to. The fuel sending unit part
#fg05m. the fuel pump that used in conjunction with the fuel sending unit is ep381. good luck with you swap. im swaping a 4.8/4l60e into a 1980 gmc c15. good luck with your swap. Clark. |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
