Rickey's 1969 CST 396 Build

[lolife99]

Originally Posted by jr1000yarder

Front end all done with ECE 2 1/2" drop spindles and disk conversion. Need to torque everything and re-install the sway bar yet.........now the brakes and ebrake. Trans is finshed also. Did a mild shift kit and replaced everything. ...soon we will have a roller with a driveline! !!

It looks like you have your centerlink installed backwards.
The inner tie rods should install from the back side.
This put the castle nuts on the front side.
Common mistake, but it needs to be fixed.
Look at this thread,...
http://67-72chevytrucks.com/vboard/s...d.php?t=400205

[jr1000yarder]

Duh!!!!!!!!!!!!!!!!!!!!!!!!!!!

Thanks!!!!!!!!!!!!