NC 1965 C10 project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

62 bigwindow · 12-04-2016, 10:05 PM

For Sale
1965 Chevrolet C10
Fleetside Short bed
Factory inline 6cyl
3 speed column shift
I buy, sell, and trade a lot of 60 model C10 trucks and was building
this for myself as a "shop truck" daily driver. But cant seem to find the time to finish it
and need to make room for other projects
so decided to see if anyone was interested in it.
All the hard work has been done...
Clean NC title
The bed is disassembled and painted to match cab
have paint for the hood, headboard and tailgate
have new head board and wood kit for the bed floor also all new hardware to install bed floor
drop spindles and springs in front with new 6lug disc brakes
Drop springs in rear
New windshield and rear glass rubber gaskets
New window seals in doors and vent glass
New patch panels in floor and inner and outer rockers and cab supports
Inner fenders , battery box, heater box and other misc parts under hood have been powder coated
New radiator core support
Aluminum grille
60-63 cab sails
Have just about everything to finish it It will need a set of wheels due to stock wheels have wrong offset to clear disc brake calipers
and will need brake booster/master cylinder
and a few other misc things
Please email with any questions
I will try to post more pictures this week
$6000.00 obo / consider SERIOUS trades

plus ALOT of other 60's model C10 parts that can be bought seperately

66 Burban · 12-06-2016, 03:55 PM

Bump for you --- good luck with selling..............

62 bigwindow · 12-06-2016, 04:55 PM

thanks
Offers or trades????

12-04-2016, 10:05 PM	#1
62 bigwindow Registered User Join Date: Apr 2011 Location: Mocksville NC Posts: 824	1965 C10 project For Sale 1965 Chevrolet C10 Fleetside Short bed Factory inline 6cyl 3 speed column shift I buy, sell, and trade a lot of 60 model C10 trucks and was building this for myself as a "shop truck" daily driver. But cant seem to find the time to finish it and need to make room for other projects so decided to see if anyone was interested in it. All the hard work has been done... Clean NC title The bed is disassembled and painted to match cab have paint for the hood, headboard and tailgate have new head board and wood kit for the bed floor also all new hardware to install bed floor drop spindles and springs in front with new 6lug disc brakes Drop springs in rear New windshield and rear glass rubber gaskets New window seals in doors and vent glass New patch panels in floor and inner and outer rockers and cab supports Inner fenders , battery box, heater box and other misc parts under hood have been powder coated New radiator core support Aluminum grille 60-63 cab sails Have just about everything to finish it It will need a set of wheels due to stock wheels have wrong offset to clear disc brake calipers and will need brake booster/master cylinder and a few other misc things Please email with any questions I will try to post more pictures this week $6000.00 obo / consider SERIOUS trades plus ALOT of other 60's model C10 parts that can be bought seperately Attached Images Last edited by 62 bigwindow; 12-05-2016 at 06:59 AM. Reason: change price

12-06-2016, 03:55 PM	#2
66 Burban Registered User Join Date: Aug 2011 Location: Green Valley,AZ Posts: 527	Re: 1965 C10 project Bump for you --- good luck with selling.............. __________________ Remember: "When seconds count, the Police are only minutes away". Thx, Billy B.

12-06-2016, 04:55 PM	#3
62 bigwindow Registered User Join Date: Apr 2011 Location: Mocksville NC Posts: 824	Re: 1965 C10 project thanks Offers or trades???? Last edited by 62 bigwindow; 12-06-2016 at 10:39 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.