Door striker plastic bushings, what are you using? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**57NAPCO** · 12-09-2016, 01:51 PM

The aftermarket ones I'm seeing are a lot thicker than factory and don't fit over the pin.
I would call these not very good

Malo83 · 12-09-2016, 02:13 PM

Picked up some new ones at AutoZone, had only 2 bushings and they were white.

**TKCR** · 12-09-2016, 03:12 PM

I replaced the whole set, they were pretty beat up. I got the actual GM part, so there was no issue with size.

blakerj10 · 12-09-2016, 04:05 PM

Piece of 1/2 Pex tubing on mine. Works perfect.

**mongocanfly** · 12-09-2016, 05:45 PM

I bought new ones from lmc..they are white and work great..later on I read where a lot of people use the above mentioned pex..

Desert1957 · 12-09-2016, 06:09 PM

Pex

GM-power · 12-09-2016, 09:04 PM

Quote:

Originally Posted by TKCR

I replaced the whole set, they were pretty beat up. I got the actual GM part, so there was no issue with size.

Do you have the part number by chance?

SkinnyG · 12-09-2016, 09:31 PM

I machined my own out of UHMWPE.

**TKCR** · 12-09-2016, 09:52 PM

Quote:

Originally Posted by GM-power

Do you have the part number by chance?

09601750 ; 09815751 Not sure if they are available any more, but you can get some at this place. I just don't know if these are actual GM parts.

http://www.truckandcarshop.com/trucks73_91/t73_018.html

**TKCR** · 12-09-2016, 10:01 PM

I believe this is where I got mine, but they changed their web-site, and I'm not sure how you order from them. Maybe call them?

http://www.auveco.com/OnlineCatalog/...html#?page=502

**TKCR** · 01-17-2017, 12:03 PM

Finally found were you can get these. And these are Direct GM Parts:

http://www.clipsandfasteners.com/sea...?Search=a20562

Ryan Hubbard · 01-17-2017, 12:49 PM

Quote:

Originally Posted by TKCR

09601750 ; 09815751 Not sure if they are available any more, but you can get some at this place. I just don't know if these are actual GM parts.

http://www.truckandcarshop.com/trucks73_91/t73_018.html

I used the ones from them and they work great. For $8.00 each and since I am only 15 minute drive from their store, it was the best source for me.

Ryan Hubbard · 01-17-2017, 12:51 PM

Quote:

Originally Posted by 57NAPCO

The aftermarket ones I'm seeing are a lot thicker than factory and don't fit over the pin.
I would call these not very good

Those are for Fords and they are .050" thicker than the Chevy ones that measure in at .700". I tried them and they didn't work to well. They caused the door to hang up on the opening.

maxx442 · 01-17-2017, 02:38 PM

Quote:

Originally Posted by blakerj10

Piece of 1/2 Pex tubing on mine. Works perfect.

^^^^
What he said!

Bandit130 · 01-17-2017, 07:05 PM

I replaced my 74 with a set from Oreilly's. Bolts, washers and bushings. No problems.

Mr.Chevy4x4 · 01-17-2017, 07:12 PM

1/2 inch pex. Holds up a lot longer than the crappy help aisle bushings.

Mike

Matt Man · 01-17-2017, 08:03 PM

Problem I have with PEX is that I can't find anything less than 25ft in length....

Mr.Chevy4x4 · 01-17-2017, 08:05 PM

Stop and talk to a plumber. He'll probably give you a scrap out of the back of his truck.

Mike

ninety6 · 01-17-2017, 10:55 PM

Pex. a few bucks will get you enough to do a ton of them. Home depot had like a 4 or 6 foot piece i think?

On mine -- i had to make a slit the length of the tube to get it to slide over the striker. the next size up was too big.

works great, dirt cheap.

**57NAPCO** · 01-18-2017, 08:03 PM

Quote:

Originally Posted by TKCR

Finally found were you can get these. And these are Direct GM Parts:

http://www.clipsandfasteners.com/sea...?Search=a20562

Thanks for the heads up, I need a few of em. Shipping is a bit steep 12.95 for 4 but good stuff anyway.

vht · 01-18-2017, 08:59 PM

I got 4 ft of pex at Lowes.

**TKCR** · 01-18-2017, 10:04 PM

Quote:

Originally Posted by 57NAPCO

Thanks for the heads up, I need a few of em. Shipping is a bit steep 12.95 for 4 but good stuff anyway.

What I did was order other stuff to make it worth the shipping. Like a set of door pins & bushings and a few other small items.

**57NAPCO** · 01-18-2017, 10:29 PM

Quote:

Originally Posted by vht

I got 4 ft of pex at Lowes.

I understand pex works but it will not repair a damaged or worn striker

**TKCR** · 01-19-2017, 04:13 AM

Quote:

Originally Posted by 57NAPCO

I understand pex works but it will not repair a damaged or worn striker

Like mine, it looked like it had been run thru a chipper shredder, and survived somewhat.

KrazyRay · 01-19-2017, 10:41 AM

I find great OEM strikers from Suburban back doors that have little use. Also, I use my pex expando tool to slide the pex over the striker bolt.

12-09-2016, 01:51 PM	#1
57NAPCO F’B’D guy Join Date: Feb 2004 Location: Texas/Maine Posts: 2,234	Door striker plastic bushings, what are you using? The aftermarket ones I'm seeing are a lot thicker than factory and don't fit over the pin. I would call these not very good

12-09-2016, 02:13 PM	#2
Malo83 Cruzzzn' Vet Join Date: Jan 2005 Location: Porterville,Ca. Posts: 1,918	Re: Door striker plastic bushings, what are you using? Picked up some new ones at AutoZone, had only 2 bushings and they were white. Last edited by Malo83; 12-09-2016 at 02:25 PM.

12-09-2016, 03:12 PM	#3
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,979	Re: Door striker plastic bushings, what are you using? I replaced the whole set, they were pretty beat up. I got the actual GM part, so there was no issue with size. Attached Images __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

12-09-2016, 04:05 PM	#4
blakerj10 Registered User Join Date: Apr 2008 Location: Gillette, WY Posts: 16	Re: Door striker plastic bushings, what are you using? Piece of 1/2 Pex tubing on mine. Works perfect.

12-09-2016, 05:45 PM	#5
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,672	Re: Door striker plastic bushings, what are you using? I bought new ones from lmc..they are white and work great..later on I read where a lot of people use the above mentioned pex..

12-09-2016, 06:09 PM	#6
Desert1957 Registered User Join Date: Apr 2009 Location: New Freedom Pa. Posts: 1,335	Re: Door striker plastic bushings, what are you using? Pex __________________ Desert

12-09-2016, 09:31 PM	#8
SkinnyG Registered User Join Date: Feb 2012 Location: Beautiful BC, Canada, eh?! Posts: 2,270	Re: Door striker plastic bushings, what are you using? I machined my own out of UHMWPE. __________________ 1961 Apache: "Grabber Orange" Shortboxed, pancake, step-notch, air-ride, turbo, LS 1977 Silverado: Shortboxed & dropped, potato-potato V8 Pontiac Firefly (Chevy Sprint): The ultimate engine swap: 5.7L in a 1.0L bag Lotus Super 7 Replica: Scratch-built street-legal rollerskate

12-09-2016, 10:01 PM	#10
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,979	Re: Door striker plastic bushings, what are you using? I believe this is where I got mine, but they changed their web-site, and I'm not sure how you order from them. Maybe call them? http://www.auveco.com/OnlineCatalog/...html#?page=502 __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

01-17-2017, 12:03 PM	#11
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,979	Re: Door striker plastic bushings, what are you using? Finally found were you can get these. And these are Direct GM Parts: http://www.clipsandfasteners.com/sea...?Search=a20562 Attached Images __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

01-17-2017, 07:05 PM	#15
Bandit130 Registered User Join Date: Dec 2014 Location: Euless, Texas Posts: 520	Re: Door striker plastic bushings, what are you using? I replaced my 74 with a set from Oreilly's. Bolts, washers and bushings. No problems. __________________ 1974 Cheyenne 10 LWB Stock 350 W/HEI /TH350/AC/4 BBL Quadrajet Mopar by Birth Chevy by Choice

01-17-2017, 07:12 PM	#16
Mr.Chevy4x4 Registered User Join Date: Jul 2007 Location: Sims, NC Posts: 531	Re: Door striker plastic bushings, what are you using? 1/2 inch pex. Holds up a lot longer than the crappy help aisle bushings. Mike __________________ All things Chevy truck: 1986 SWB "Jolene" boosted 5.3/4l80e project

01-17-2017, 08:03 PM	#17
Matt Man Registered User Join Date: Oct 2009 Location: Buhl, Idaho Posts: 1,438	Re: Door striker plastic bushings, what are you using? Problem I have with PEX is that I can't find anything less than 25ft in length.... __________________ 86 c30 crew cab dually 454/400 4/6 drop SOLD 1-8-11 1981 chevy K10 short Bed Scottsdale SOLD 10-26-2020 67 GMC Stepside Straight six/3 on the tree "The Peach" 2020 Silverado Double Cab LT Z71 5.3 8 speed Daily Driver K10 build http://67-72chevytrucks.com/vboard/s...d.php?t=671934 The Peach build http://67-72chevytrucks.com/vboard/s...d.php?t=733903

01-17-2017, 08:05 PM	#18
Mr.Chevy4x4 Registered User Join Date: Jul 2007 Location: Sims, NC Posts: 531	Re: Door striker plastic bushings, what are you using? Stop and talk to a plumber. He'll probably give you a scrap out of the back of his truck. Mike __________________ All things Chevy truck: 1986 SWB "Jolene" boosted 5.3/4l80e project

01-17-2017, 10:55 PM	#19
ninety6 Registered User Join Date: Feb 2016 Location: Mason, OH Posts: 90	Re: Door striker plastic bushings, what are you using? Pex. a few bucks will get you enough to do a ton of them. Home depot had like a 4 or 6 foot piece i think? On mine -- i had to make a slit the length of the tube to get it to slide over the striker. the next size up was too big. works great, dirt cheap.

01-18-2017, 08:59 PM	#21
vht Registered User Join Date: Jun 2013 Location: Brooksville Ky Posts: 531	Re: Door striker plastic bushings, what are you using? I got 4 ft of pex at Lowes.



Register or Log In To remove these advertisements.

01-19-2017, 10:41 AM	#25
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Door striker plastic bushings, what are you using? I find great OEM strikers from Suburban back doors that have little use. Also, I use my pex expando tool to slide the pex over the striker bolt.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.