|
12-22-2016, 11:47 AM
|
#22 |
|
Registered User
Join Date: May 2012
Location: Colo Springs, CO
Posts: 870
|
Re: Figure out gears
Note:
There are two widths in the later year 14SF, 6 lug axles. I used the narrower one. My final result is almost exactly the track width of the front (wider than the stock). The stock 1/2 ton blazer rear axle is about 1-1/2" narrower on each side than the front axle.
__________________
- Jeff 89' K5 Blazer, 2.5" lift, 35" tires  04' GMC Yukon XL, 3/4 ton, 8.1L |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode